Monthly Archives: June 2014

Mud cleaner for U S Market

One mud cleaner unit is purchase by the native US solids control company. Custom will apply this equipment for separating particle. According to customers’ feedback, they are pretty satisfied with our unit performance and completely meet his requirement. Our fast delivery time and quickly response give our client confidence to purchase the unit. There is no doubt that US market will be the huge potential market for GN solids control unit

Features of GN mud cleaner

1.10 inch vortex cones will handle a range from 100 microns particles to 40 microns particle, 90% solids will be kick out from the de sander conesMud Cleaner

2.4 inch vortex cones focus on the 40 microns to 20 microns solids without ball valve.

3.Both of cones are 100% PU material assure the cones long life service and stable working condition

4.Shale shaker and shaker screen ultimately separate the solids from de sander and de silter

5.We could provide the fast service and technical support for the America market as we have the branch in Houston

Stay with GN gives your best solution

How to match mud agitator in mud tank

Mud agitator is a standard machine for drilling mud tank. It really is used in mud tank to agitating fluids and keep away from it from settling down.
Per the design variety, you will discover coupling variety agitator and direct connecting sort mud agitator.
Per difference Horsepower, you will discover agitator vary from 4hp to 30hp.
JBQ   Mud Agitator Technical Parameters:
Model Motor (Kw) Speed (RPM) Impeller Size (mm) Impeller Qty (pcs) Ratio Weight (Kg) Dimension(mm)
GNJBQ030A 3 60/72
(50HZ/60HZ) 650 1 25:1 190 909×525×527
GNJBQ055A 5.5 850 1 250 1072×610×588
GNJBQ075A 7.5 950 1 356 1157×670×607
GNJBQ075A-D 800 2 378
GNJBQ110A 11 1050 1 479 1297×740×692
GNJBQ110A-D 850 2 494
GNJBQ150A
15 1100 1 684 1330×890×747
GNJBQ150A-D 950 2 702
GNJBQ185A-D 18.5 1050 2 750 1510×890×753
GNJBQ220A-D 22 1100 2 780 1529×890×753
Remarks Shaft and impeller will probably be offered by GN, but not including within the weight & dimension.
How to match mud agitator:
1) Per tank dimension, usually 25cbm around there should be a mud agitator.
2) Mud agitator shaft length depends on tank dimension.

Which tank compartment should equipped mud agitator?here http://mudagitator.wordpress.com/2014/04/26/gn-mud-agitator-design-in-2014-year/, following is the information
1) Desilter tank, centrifuge tank, mixing tank, storage tank, trip tank, pill tank, there should be equipped mud agitator
2) Vacuum degasser tank, it’s optional to equipped mud agitator
3) Shale shaker tank, there is normally no need to equipped with mud agitator

Mining Dredge System

For a mine tailings dredging project , project contractors normally need to dewater the mine tailings and recover the sand and silt size particles.  Depends on different mining material, contractors should carefully select the relative equipment and treating capacity to process the fluids.

First of all, we know what percentage and size of coarse tailing, full tailing stream and fine tailing. According the information, we could the choose the shale shaker with shaker screen and de sander or de silter.

 

Secondly, we should know that the expecting treating capacity and recovery the size of particle. According treating capacity and particle size, we are able to select the mount the shale shaker and the number of hydrocyclone cones. If the recovery size of particle is over 0.04, de sander cones will be enough to met clients’ requirement.

ZI@T9I3W~]}Z6D4BGJXV~PC

For 1500GPM Mining dredge

1.3 Sets of GNZS703E shale Shaker

2.1 Set of GNZS703E-3S16N Mud cleaner or GNZJ703E-3S desaner

Gn Solids Conrrol and Cuttings Dryer for WBM and OBM

Commonly, Hi-G dryer shaker is employed for WBM drilling cuttings remedy and Vertical cuttings dyer is applied for OBM drilling cuttings treatment. The OOC of WBM solids discharged from Hi-G dryer shaker is about 20%; the OOC of OBM solids discharged from Vertical cuttings dyer is about 5%.

 

GN solids control 2nd generation solutions is been testing in CNPC job site. The testing drilling mud is WBM. Just after treated by 2nd generation vertical cuttings dryer, the solids discharge is substantially dryer which is usually solidification directly. The recycled clean water based mud can be transferred to decanter centrifuge for ultra fine solids separation, then the liquid might be transferred back to solids manage mud tanks for reuse.

 

The WBM drilling cuttings after treated by Vertical cuttings dyer is mud cake, substantially dryer. As OBM is easier than WBM when treated by Vertical cuttings dryer, the OBM treating outcome must be a great deal superior. Within this case, we can save plenty of price for client, no need Hi-G dryer anymore.

 

For customer, wanting 1 sets cuttings dryer, you could possibly speak to GN Solids handle to acquire clear answer. We can offer you solids control and cuttings dryer, reputable working overall performance and financial in price.