Monthly Archives: July 2014

GN Production Line for Drilling Mud Feed Pump

As a China leading manufacturer of mud cleaner, GN Solids America could offer several types from the feed pump for mud cleaner transferring. Under would be the GN’s production line.

GN mud cleaner is same design and style with Mission 25 series that could be applied in mud recycling method as transfer pump for hydrocyclone unit. By equipped with distinctive horse power electric motor, the capacity with the pump could be 200GPM to 1400GPM.

GN mud cleaner is structure of vertical and single stage single suction system overhung mud cleaner system, Throughout some HDD project, the mud cleaner is vertical located in the mud pit to transfer dirty mud towards the shale shaker within the system.

GN mud cleaner is coming from globe renowned brand Nestal,because it is usually a variety optimistic displacement machine,The stainless steel shaft ensure the lengthy lifetime on the system.

Mud cleaner system is constantly connected together with the mixing hopper which is made use of to reduce the large size drilling mud system chemical compounds or polymers that is made use of to keep the weight of the mud. GN impeller is created of higher wear resistance cast iron with lengthy service life.

Welcome to make contact with with GN Solids America to get a quote around the feed mud cleaner or other solids control equipment.

relevant post:

VARIETY OF DRILLING MUD SYSTEM

Dual function unit with double deck shale shaker and mud cleaner

Development trend of solids control system configuration

A whole Solids Control method shall incorporates shale shaker, vacuum degasser, desander, desilter, decanter centrifuge, mud agitator, mud gun, mud tanks. Etc. You could find that the largest consumed power is generated from desander and desilter. Because it required significant horse power centrifugal pump for feeding the desander cones & desilter cones to reach proper working performance with certain feeding pressure. It generally require 55kw/75kw centrifugal pump.

With more and more attention on environmental protection and energy saving, the solids control service company now are trying to by pass the desander & deilster. But how ?

Firstly, significant treating capacity shale shaker is needed with high mesh/API shaker screen. Thus, about 30 to 59 microns particles can be removed.
Secondly, huge treating capacity decanter centrifuge is needed. The is the last treating step of the mud to cut mud weight or recovery barite.

Consequently, only 2 phase solids control equipment is enough for the drilling. For this kind of new try, professional solids control engineer and mud engineer is required. If this design become successful and proof to be more efficient, a new generation will come for solids manage equipment manufacturer or solids manage service company.

For more solids control,pls reviews the links as below:

Solids Control Programs and Solutions

GN solids control can offer a hugely efficient shift

 

GN Shale Shaker

GN shale shaker isn’t only made use of inside the oilfield field but in addition applied inside the HDD,CBM,TBM and Dredge slurry separation, which is in a position to separate the bigger solids as much as 780 microns. Inside the oilfield business, shaker is with top-hole sections which save the tank space and simply obtain the high volume drilling fluids.. Throughout the oilfield solids handle program, shale shaker could generate strong G-forces and its successful vibrating motion can swiftly eliminate the solids from screens and particles from drilling hole. GN certified shale shaker is able to reach the aim.
GN linear motion shale shaker
GNZS series linear motion shale shaker is with advanced structure and heat remedy which assure lifespan. Oil or Martin Vibration motor & GN stainless screen plate are installed into screen basket. Screen basket is fixed on the adjustment beam. There are four damper spring which effectively assist the shaker vibrate. Also, the spring is capable of preventing the adjoining parts and devices for damaged.
Except oilfield shale shaker, GN can also supply decanter centrifuge, mud cleaner, mud desander and de silter etc.

shale shaker related post as below:

Shale shaker techniques

famous shale shaker producers located in usa

shale shaker

 

 

500GPM System Apply For HDD Pipeline Project

GN crank up two sets of 500 GPM system for the Chinese largest HDD drilling contractor. We are a stable and reliable partner for supplying the mud recycle system including shale shaker, mud cleaner, centrifugal pump, tank and other relative unit. GN high quality equipment and positive customer service attitude has received compliment from our clients. We will show you the Configuration of 500 GPM system..

Main Components

1. First step is one set linear motion shale shaker with 40 mesh screen to separate solids above 400 microns

2. Second & third step are 10″ de sander cone and 4″ de silter cone to separate smaller solids

3. There are two sets of centrifugal pump for pumping the mud to de sand and de silter500GPM Mud System CPP.

4. Mud tank is with walkway, handrail, pipeline, valves, etc

GN is able to supply from 150 GPM to 3000GPM system to suit different projects. Also, our systems are exported over 60 countries and areas not only for the HDD but also apply for the CBM, oil & gas drilling, TBM, bored pile and dredge slurry separation etc. For more information, please contact with lin@gnsolidscontrol.co

Flare type poor boy degasser

Flare kind poor boy Vacuum Degasser is usually a preferred sort poor boy degasser connected having a flare igniter.
Traits of flare sort poor boy degasser
Flare kind poor boy Vacuum Degasser is surely an reputable and crucial security gear for drilling operations. It may be great for use specifically where drilling is almost absolutely to encounter important volumes of gas, sour gas or when an operator is drilling with an below balanced mud column.
Vent line of flare type poor boy degasser
Flare sort poor boy Vacuum Degasser is equipped with U-tube vent line with min. length 50m, diameter eight?The vent line lead the hazardous gas to remote safety region and fire it.
Parameters of flare variety poor boy Vacuum Degasser
Model GNZYQ1000A
Tank diameter 1000mm
Capacity 200~280m3/h
Inlet four Inch
Output ten Inch
Vent Line eight Inch
Weight 2234Kg
Vacuum degasser connected with poor boy degasser
There ordinarily vacuum degasser in mud plan just just soon after shale shaker. Some time, the gas from vacuum degasser discharged straight to atmosphere. In some case, the drilling internet net website will connect vent line of vacuum degasser with poor bog degasser vent line, to fire the gas appropriate straight away after separated.

visit here to track more Vacuum degasser infor,related post as below:

http://www.gnsolidsamerica.com/vacuum-degasser.html

 

 

Top Economic 500GMP Mud System for HDD Project

GN has designed a variety of mud system to all over the world including oil & gas drilling industry, CBM and HDD project. There is a 500GPM mud system for Middle East.

ComponentsGN500-GPM-mud-recycling-system-for-HDD-300x202

1.There are three compartments in the mud tank, which is Shaker compartment, mud-cleaner compartment, mixing compartment.

2. GNYZ series submersible slurry pump provide the slurry from mud pit to GN shale shaker

3. Under the 40 mesh shaker screen, three panels and large screen area GNZS703 is able to handle with 528GPM fluid with excellent working performance

4.1# centrifugal pump transport the fluid from shaker compartment to de sander unit.2# centrifugal pump will transport the fluids from de sander compartment to de silter unit for the final process

5. Second and third cleaning steps make up mud cleaner which is GNZJ703E shale shaker, one unit 10″ de sander cone and eight  unit 4″ cones

6. Integral mixing system GNSLS35A-300 Jet Mud mixer which efficiency in blending chemical such as bentonite, polymers and other powder additives with drilling fluid.

GN 500 GPM mud system is a compact and user friendly solids control design. For your project, please contact with GN Solids control.

 

Functional Pipelines in GN GNMS Series Mud Cleaner Program

GNMS series mud cleaner is definitely a certainly developed compact program for treating the drilling mud in pretty a handful of measures by signifies of various mud pipelines connecting tanks and several functional equipments via the whole operation procedure.

Per mud tanks, you could find out trip tank, shale shaker tank, desander/desilter tank, centrifuge tank, mixing tank and storage tank. Per equipments, it can be achievable to uncover 4 measures solids control/ 5 approaches clearing measures like GNZS shale shaker, GNZCQ Vacuum degasser, GNZJ mud cleaner, GNLW mud cleaner, Mud agitator and Mud gun, Jet mud mixer and and so forth.

All they are multi-functionally connected by diverse pipeline,GNMS system can lead the drilling mud cleaner into a circulation as per drilling method demands, and could also treat mud cleaner by suggests of adding weight, mixing/preparing, agitating and filtering.

Water pipeline for supplying the entire GNMS method clean water is connected to water pipes,Chemical tank and pipeline can present the method with corresponding chemical compounds and elements added in towards the mud cleaner recycling plan by way of chemical pipeline to corresponding tank. Mud gun pipeline is made use of to transport the mud from 1 tank to 1 additional. Overflow pipeline is for the mud cleaner to flow to oriented tanks very simply and smoothly.

So, in all, GN New Model Mud Cleaner for US Customer is really a total method combined by mud tanks, solids manage and conveying equipments, and, essential pipelines.now,about GN New Model Mud Cleaner for US Customer this article,we check it and find it is good about solids control introduce.pls contact it. for more about gn company news,pls read here, GNSOLIDSAMERICA Can Manufacture Premium Vertical cuttings dryer is 24/7 for service.