Monthly Archives: August 2014

500 GPM Mud System for Trenchless Drilling Building delivery to russia

500 GPM mud program are largely utilised for Trenchless Construction, water effectively drilling, CBM drilling, geothermal nicely drilling. The fundamental objective of drilling waste management is employed to take away the massive drilled solids coming in the borehole and recycle as considerably as clean fluids back for the drilling mud circulation program that will be pumped down hole.

Solids Control System 7
The mud system delivered to russia is for Trenchless Creating. Its Major configuration is as follows:
1 x GNZS703-8N Mud Cleaner, 8 desilter cones with 1 double linear motion shale shaker at bottom
1 x GNSB Centrifugal Pump to feed the desilter unit
1 x GNSLH Jet Mud Mixer to Mix the drilling mud
1 x Mud Tank 20ft containerized
The 500GPM mud cleaner system has been utilized in China, Australia, India,Bangladesh, Indonesia, Europe etc

GN Solids America can provide high quality drilling waste management to the word.

Main Parameters for Picking out a Drilling Mud System

Basic parameter of drilling rigs is important for displaying the functioning capability of a rig, it’s standard grounding for designing and deciding upon a suitable drilling rig. Such parameters incorporate following info: key parameter of Drilling Mud System, lifting method parameter, rotating technique parameter and recycling method parameter. Later we mostly speak about principal parameter of drilling rigs. GN Solids Handle make Drilling Mud System for full capacity range of rigs.
A Drilling Mud System’s key parameter is general requirement for defining the rig. Other parameters rely on it. The definition of principal parameter is ruled by national drilling rig standard, currently the recognized primary parameters are as following:
1. Maximum well depth. The maximum nicely depth signifies the deepest drilling depth with appointed drilling tool, which is often defined as a combination of rated dimensioned drilling tools. For instance, I-130 drilling rig’s max depth is 3000m, with 5 1/2 inch drilling pipe. US I320 and Chinese ZJ45 drilling rigs all regard max well depth as major parameter of rigs.
two. Maximum lifting load. This data suggests the maximum static loading of hook. F320 Drilling Mud System from Romania regard this parameter as main.
three. Rated drill column weight. Now this parameter is no longer utilised, they all changed into maximum nicely depth.
four. General Power of Drilling Mud System. Common energy is all three key working systems’ and auxiliary equipments’ total energy, for ensuring the energy consumption for the duration of work.
Per the distinctive parameter value, drilling rigs are divided into different capacities. Offered above parameters, GN Solids Control could design and style certain solids handle systems for them. Now GN has offered to several globe well identified drilling businesses with ideal Drilling Mud System.

May perhaps you’ll need extra information, speak to me without the need of delay.

Vermeer India Got GN 350GPM and 500GPM Mud Cleaner Program for Their HDD Rig

More and more HDD drilling contractor and Rig manufacturer come to GN for compact Mud cleaner as GN Solids America is retain creating herself in designing and perfecting the mud recycling answer in HDD sector. The globe popular HDD rig manufacture Vermeer, Ditch Witch, America Auger a single following another contacted with GN Solids Control for searching for the opportunity of cooperation and a few of them have currently been GN’s client.
GN has already exported 5 units total HDD Mud cleaner system to India where there’s an extremely large requirement for compact mud technique. India is actually a crucial nation that is developing the trenchless technology and has the own society of IndSTT.
GN 500GPM HDD Mud cleaner is very preferred model. The largest the HDD contractor in China CPP has already got nearly 30 sets mud technique at this capacity. This model can also be broadly employed in Australia market place. The base configuration with the 500GPM is as under:
One unit GNZS703E-DZ Linear motion shale shaker with the mud feed on prime of your shaker deck which shortens the shaker length that is certainly appropriate for the HDD Mud cleaner.

1 unit GNZJ703E-8N De-silter cleaner with eight pcs de-silter cyclones separate the drilling cuttings down to 15 microns. That is as per clients working condition of less sand in the Mud cleaner, we style the technique no de-sander cyclone for expense saving.
One 40 ft container size mud tank which has enough space for recycling and retailer the active mud.
2 units centrifugal pump of 50HP, model GNSB6x5-12, 1 of them is for feeding mud to the de-silter cleaner and the other one particular is employed as mixing pump matching using the mixing hopper.
To prevent the solids settlement in the mud tank, the mud agitators and Mud cleaner are also in our consideration.
GN Solids Control could offer HDD mud recycling program skid mounted and Hydraulic Jack-up style. For the capacity of your mud method, it ranges as 150GPM, 300GPM, 500GPM, 800GPM, 1000GPM and 1500GPM.
more about mud cleaner introduce as below:

GN Production Line for Drilling Mud Feed Pump

The most popular Vertical Cuttings Dryer model for Nigeria Customer

One of the most well known Vertical Cuttings Dryer model for Nigeria Customer
GN Solids Control upgraded 2nd generation model vertical cuttings dryer have two model: GNCD930C and GNCD930C-VFD. GNCD930C could be the base model, fixed speed Vertical dryer and GNCD930C-VFD is added 1 VFD control panel primarily based on the base model, to become variable speed. But as the speed of Vortex is 900rpm, not as well high, there is no major difference among GNCD930C and GNCD930C-VFD.

GNCD930C is the most common model for Nigeria customer. The majority of customer buys this model to have base requirement and save income. Vertical-G dryer can’t function separately, it have to have to operating with each other with Decanter centrifuge to get improved treating result. GN drilling Cuttings management system is standard instance on the best way to use GN vertical-G dryer and higher speed decanter centrifuge.

GNCD930C with updated parameters, important upgrade see below:

1) It added a air knife to clean the basket screen in the course of functioning to prevent hole blocking.
two) The oil lubrication cooling program tends to make the oil lubrication much more steady and appropriate temperature for bearing perform.
These two components make GN vertical cuttings dryer or GN vertical-G dryer or GN Vortex get a lot much better working efficiency in the course of real job.

GN Decanter Centrifuge with 3200rpm higher speed centrifuge GNLW363 series centrifuge is the most common centrifuge model for Nigeria consumer.  Several consumers get this centrifuge for solids manage & waste management service.
GN Solids America-Drilling Waste Management Company: http://drillwastemanagement.com/gn-solids-america-drilling-waste-management-company/
Gn Solids Conrrol and Cuttings Dryer for WBM and OBM: http://drillingmudcleaner.com/gn-solids-conrrol-and-cuttings-dryer-for-wbm-and-obm/