Monthly Archives: February 2015

Mud Gun & Mud Gun Pipeline in Solids Control System

Regarding to solids control system equipment, one may firstly realize shale shakers, desander and desilter, the decanter centrifuges and mud cleaner. But nobody could disregard the mud gun that is small equipment not small effect equipment.

GN Solids Control has much experience in designing and producing solids control system and equipment. Including the solids control system, I will introduce the essential function of the mud gun in the following paragraph.

What is the mud gun utilized for?

1, mud gun can be used to cooperate with the mud agitator to keep the drilling mud from settling. The mud agitator is installed in middle of the tank, and corresponding mud gun is near that, for caring concerning the tank corners.

2. for delivering drilling mud in one tank to the another. Obviously, the mud gun can’t accomplish this goal simply by itself, also it need assistance in the mud gun pipeline.

What does mud gun pipeline seem like?

A mud gun pipeline is really a 2 inch or 3 inch cubic pipe installed through the top frame of mud tanks. It covers nearly each tank from the system, aside from the shaker tank. Since the drilling mud in shaker tank isn’t active mud, which cannot be used directly in further drilling. However the drilling mud in other tanks, like active tank underneath the centrifuge, most occasions it may be employed for mud pumps. Or mud kept in storage tank.

Since the mud gun itself doesn’t have energy they are driving the mud, the mud gun line actually is associated with the blending pumps. Once the user have to transfer mud via mud gun pipeline, it always shut lower the bond between your mixing hopper and it is centrifugal pumps, then your pumps can be used to suck mud to mud gun line. By closing some tank’s mud gun lines, drilling mud is moved to destination tank via mud guns.

GN Solids Control is professional in solids control systems, if you have any problem about treating the drilling mud, GN will be the best choice.

 

Related Arciels:

Mud-Gun-1

Dewatering Unit Application and GN APM Mixing Unit

It’s more frequently learned about dewatering unit in drilling industry but the majority of the persons working in this industry are not so acquainted with the dewatering unit. In the following paragraphs, I will provide a simple introduction on which is dewatering unit and also the application.

Dewatering unit we are also able to name it as ultra fine solids removing system. It always includes the fine solids separation system and polymer mixing system.

What’s the composition from the dewatering unit?

1. Feeding System

GN’s dewatering system has 2 screw pumps utilized for moving the flocculation and also the slurry towards the decanter centrifuge. The harmful chemicals and also the slurry meet in the feeding pipe from the decanter centrifuge and the flocs also created here. Then your slurry with large size flocs will get in to the centrifuge together there for separation.

2. Automatic polymer mixing system.

GN dewatering unit automatic polymer mixing product is 2 tanks system. It’s outfitted with medical feeding system, water injection system, mixing system and delivery system, electrical control system and gauge system. This APM system has 2 screw conveyors, the first is accustomed to transfer the powder medications towards the hopper around the mixing tank, and yet another screw conveyor is situated underneath the hopper to provide the powder in to the pre-mixing tank.

3. GNLW553-VFD dewatering centrifuge for separation

GN dewatering unit choose GNLW553 various frequency drive model serve as the separation centrifuge. The control panel was created as four various frequency drive for that centrifuge primary motor, back motor and 2 feeding pumps for slurry and medicals. Following the separation from the centrifuge, the big size flocs could be removed out, then your ultra fine solids is separated out.

 

Related Arciels:

553 Decanter Centrifuge 2

Easy Operation and Cost Saving Mud System

The majority of the large capacity drilling project needs one set drilling liquids recycling system. As the drilling mud system is considered high configuration system and economic configuration model. Our prime configuration mud product is continually equipped for that oil drilling rig. This kind mud system consists all of the solids control equipment like shale shaker, desander, desilter, decanter centrifuge and vacuum degasser. For many deep oil wells drilling, the mud system is composed of numerous mud tanks for active mud storage. The economical configuration mud product is always employed for an oil well drilling, workover rig project, piling project and horizontal directional drilling project.

 

Workover rig mud product is little simpler within the solids control equipment configuration because the mud system sometimes only retain the shale shaker for just one stage solids control. The workover rig there is no need the drilling mud to become treated very clean. Additionally, it includes a mud mixing system that can be utilized to re-compose the drilling mud.

 

Based on the flow rate from the directional drilling rig, the HDD mud product is frequently split into different model. For example GN’s model 150GPM, 350GPM, 500GPM, 800GPM, 1000GPM and 1500GPM. The HDD contractor would always not utilize the decanter centrifuge in the system because the drilling fluid’s request is not such high around the cleanness. However, many clients has high request, they’ll also place the decanter centrifuge in the mud system.

 

The piling product is the easiest desanding unit there are just one tank and one set high capacity desander. GN solids control can supply the piling system of D50 and D100 according to the treating capacity. Always the piling product is no mud mixing system, the solids are taken away by the vibration screen, and also the liquids get lower towards the tank and also the pumped to the rig.

Related Arciels:

0224 500gpm mud recycling system