CIPPE 2016 is just just about to happen, you may still remember recently, on CIPPE 2015, GN brought many new developed products that covers almost all areas where GN’s products can be applied. Though in 12 months of 2015, the olive oil business faced the unrivaled recession in worldwide, GN Solids Control still held the steps to improve the products top quality and never gave up the investment decision on innovation. In the approaching CIPPE 2016, it is considered that GN’s booth will probably shine again with the fresh developments.
Below information concerning GN at CIPPE 2016
• Address: New China Worldwide Exhibition Center, Beijing; Number 88, Yuxiang Road, Tianzhu, Shunyi District, Beijing
• Time: March 29-31, 2016
• GN Booth No .: HALL E2 -E2200, booth area 272m2.
• Plane graph: http://public.cippe.com.cn/static/hall/2015bj/hall_e1.jpg
• Appointment email: sales@gnsolidscontrol. com
• GN Factory Location: 40KM into the Exhibition Center (40 Moments Drive)
In the event of 2015, GN Solids Control brought 1 unit drilling waste cuttings management system which is the most popular sellers in GN’s products line in the year connected with 2015. One skid wilt removable telescopic frame sets up all the equipment into a small unit. This unit can be transported by a trailer without having removing the equipment on it. Along with fully consideration on the handling diagram, this system is definitely including vertical cuttings dryer unit, VFD decanter centrifuge and relative transferring pump. GN also have modular design and style equipment could be ordered individually and then assembled on web-site according to specific onsite area condition. Modular design waste materials cuttings equipment could be a lot more freely layout onsite.
In addition to the waste cuttings management system, the traditional drilling fluids solids control equipments were also exposed to GN’s booth. High Gary the gadget guy force drying shaker, mud cleaner unit, 22 ” big bowl decanter centrifuge and even the piling undertaking used de-sanding unit were being shown there, which makes visitors sigh with emotion since GN could provide the total line solids control in addition to waste disposal equipment for different industries like oil going, no dig drilling and perhaps construction projects.
2016 is usually fully a fresh new year to get GN Solids Control, while GN was just accorded as New High-tech Party. With this honor, GN wish to show herself at the CIPPE 2016 with a new image. Brand new development on products will certainly be shown there to seize clients’ eyes. Expecting experiencing you again at CIPPE 2016.
Monthly Archives: January 2016
GN hydraulic drive centrifuge for Solids Control application
GN Solids Control is doing motor drive centrifuge for over 5 years. After these years, GN centrifuge design, quality, working performance, working lifetime is reach World Class standard, competing with Derrick centrifuge, Swaco centrifuge, Nov brandt king cobra centrifuges. To provide more centrifuge choice, GN Solids Control is doing research on Hydraulic drive centrifuge, and this new type centrifuge will be shown at CIPPE 2016.
GN Solids Control is exporting lots of high quality, good price to international clients in oil gas drilling, HDD drilling, CBM drilling, water well drilling industries. Recent exporting project including but not limited to below cases.
Case 1: GN mud mixing system is exporting to Middle East
The client is GN old clients who bought one set 500gpm drilling mud system. Up to now, the performance is still very good. This save lots of cost and work time for client, also win good fame for client, more and more projects coming to the HDD drilling customer.
Case 2: GN mud cleaning system is exporting to Middle East for Water well drilling
The water drilling client buy one set 200gpm mud system from GN in 2014; after knowing more about GN, the buyer repeat two sets 500gpm mud cleaning system for water well drilling, with customized color of shale shaker, mud cleaner, mud tank, etc.
Case 3: GN Decanter centrifuge is exporting to Africa drilling market
GN Solids Control decanter centrifuge is mainly used for solids control / drilling waste management. The high quality centrifuge replace many US brand centrifuges in the market. GN centrifuge is replacement centrifuge for Derrick centrifuge, Swaco centrifuge, NOV brandt centrifuge.
Buying centrifuge from GN Solids Control, the client can get the best selected centrifuge from China, most cost-effective. We have one client firstly only test 1-2 sets centrifuge. After 3 years, the client place order of over 30 sets centrifuges.
GN Solids Control is committed to offer top quality solids control equipment. Pls contact us freely if you need some.
GNLW223 Mini Decanter Centrifuge’s Application
In this article, we mainly introduce GNLW223 Decanter Centrifuge, 1 mini centrifuge with high quality and perfect performance comes to mass production in GN Solids Company.
Until now, GN has the full range of decanter centrifuges from the big treatment capacity to small treatment capacity. For these centrifuges, the different rotate speed, different voltages and frequencies, fixed speed or variable speed, high or low configurations are also availablefor customer options.
Compared with the other types of Decanter Centrifuge made by GN Solids Control Company, the most obvious symbol of this Mini Decanter Centrifuge is itsvery small treatment capacity in unit time and higher speed. The details are as below,
- Max treatment capacity is 9m³/h (40GPM);
- Max speed is 4500RPM;
- Bowl diameter is 9 inches;
- Separation Point is 2-5μm;
- Besides, there are 2 types of speed for customer option. 1 is fixed speed and the other 1 is variable speed.
GNLW223 Mini Decanter Centrifuge is widely used for separating out very fine solids particles when customer needs the small treatment capacity, which is especially used in like the Diamond Core Drilling, Industrial Waste Water Management, Mining Industry and so on.
As its small treatment capacity and mini structure, GNLW223 Mini Decanter Centrifuge gets the good reaction from the global customers once goes into the market.
For the North America Market, until now GN Solids Control company has sold 15 units to the Canada, 2 units to the America and 3 units to the Chile.
The Project for Canada’s Customer – 10 Units GNLW223 Mini Decanter Centrifuge
The Project for Chile’s Customer – Solids RemovalSystem with GNLW223 Decanter Centrifuge Configured
If any customer is interested to this Mini Decanter Centrifuge, the following details are needed to provide to us so that GN Solids Control company could confirm if our product could meet your requirement in advance. As below,
- Solid Content of Fluid;
- Specific Gravity of Fluid;
- Viscosity of Fluid;
- Main Solid-phase Composition of Fluid;
- Solid-phase Particles Size Distribution;
- Source of Fluid;
- Expected Treatment Capacity.
Explosion Proof Mud System to North America
Explosion proof is firmly requested on oil drilling site for the application of motors and control panel. This is to secure the safety of operation as there will be hazardous and flammable gas on the drilling site.
From the beginning of GN company establishing. GN provided drilling mud system to oil field with explosion proof standard electric motors and control panels. Till now, GN has enriched the motors and control panels that provided with different Ex. Proof certification and up to hazardous Zone 1 area application.
GN is able to provide Ex. Proof items with certification of IEC and ATEX. In regards to the motors, GN can provide certified units with CSA, UL and IEC. These certifications would meet demand of customers from the Canada and USA and some other areas.
This is really good news for both GN and the customers from North America. GN Solids Control got the opportunity to supply the mud system to North America, in the meantime, the customer can get the motor with a cost saving price. GN’s business will be expanded greatly in this market, as a feedback, the customer will get mud system with top quality and reasonable price.
However, not all the mud system in drilling project will request Ex. Proof motor and control panel just like the HDD and water well drilling. For some cost saving purpose, the non-Ex proof motor and panel will be used in the mud system. This type drilling is not so deep, and no flammable gas will be come out from the underground, the sparks produced during the electric devices running will not ignites the flammable gas.
GN is always focusing on higher level customer and providing high standard products, which means the motors GN provided could be non-Ex. Proof , while all the control panel in GN’s mud system are explosion proof standard.
How to Quote Mud System to Clients
Experienced sales guys know how to ask question to clients and get the required information so that he or she could make an accurate and timely quotation to the clients. This is the common rules for the sales guys in all the industries. It makes no exceptions for the sales of drilling mud system.
Drilling mud system is used to match the drilling rig for recycling the drilling fluids to reduce the drilling cost. Comparing with the single drilling fluids solids control equipment, the mud system is consisting of many equipment and mud tanks. Mud system is much complicated. So, if a sales guy wants to give a quote to the clients, he should know what the client’s request is. However, sometimes even the clients don’t what information would be helpful for sales guys to make a quote.
Here, we would like to share a knack for all the sales guys who want to serve the clients better and save the communication time before quoting.
In regards to the drilling mud system for oil & gas drilling, when client’s inquiry is coming, we would like to know some key information. What is the Horse Power of the rig? What is the loading capacity of the rig hook? And how deep you want to drill? In fact, so long as we got answer of any one question, then we are able to give the client commercial and technical quote. Such as the China model ZJ40, if we got this model, we will know this rig can drill down to 4000 meters, the hood capacity is around 225 metric ton, and the rig Horse Power is 1000. Here we say the HP is for the rig winch. And then we will get what is the flow rate of the used drilling mud, and how many mud tank this rig will need for storing active mud. GN Solids Control always has the standard configuration for rig from 550 HP to 3000 HP.
Together with the commercial offer, for the mud system quote, GN solids control is willing to provide a technical offer including the drawing of equipment layout and working diagram. This would be much helpful to clients to understand how GN’s mud system works and what equipment involved in this mud system.