Drilling cuttings box is designed to transport drilling cuttings , solids out of desander , solids out of desilter and solids out of decanter centrifuge or pit cleaning waste during drilling operation . The drilling cuttings box transport by fork lift and set container loading point normally .The drilling cuttings box will be fully enclosed with a lifting frame and a large sealing door designed for filling and emptying , the cuttings box can be provided with certified lifting slings and discharge door has an internal seal for secure when transport .

A typical drilling cuttings box has an internal volume of 2.3 cubic meters and the size can be changeableinfact . The gross weight of 8000 KG is allowed the drilling cuttings box to be filled with an maximum of about 6600 KG of drilling cuttings or other drilling waste . There are fork lift working point for easy moving for fork lift .

The drilling cuttings from shale shaker will be depending on drilling conditions , normally the drilling size larger than 100 microns cause screen minimum normally 150 mesh size and drilling solids from desander will be larger than 50 microns , desilter solids will be larger than 20 microns . Different machine will produce different size drilling solids , decanter centrifuge will separate solids 2 to 7 microns , if client using middle speed centrifuge , solids above 7 microns but the solids will be finer if they use a high speed decanter centrifuge .

GN Solids mainly supply solids control equipment which can separate drilling solids or drilling cuttings from drilling mud , drilling waste management system which is the try drilling cuttings or recycling drilling fluids from solids particals . But we supply drilling cutting box also to assist with GN Solids equipment and service for all client .