Monthly Archives: February 2023

Vertical Cuttings Dryer for OBM to Overseas Mud Company

GN Solids Control company is a leading brand from China focusing on thedesign and manufacturing of drilling mud solids control equipment, drilling waste management equipment, as well as high quality replacement shaker screens. Days ago, GN Solids Control completes a package of vertical cuttings dryer system for an overseas mud service company. It is a customized system will be used to separate oil base mud and cuttings.

Vertical Cuttings Dryer 2023.02.23

The vertical cuttings dryer packages is including but not only limited to: Vertical cuttings dryer module GNCD930G, high speed decanter centrifuge, fabricated container ( which is complete with windows, doors, lights, electrical control penal, etc…), drill cuttings transfer screw conveyor, flushing pump of the vertical cuttings dryer, lifting device, buffer tanks for recovered mud, feeding pumps, etc.

Vertical cuttings dryer modular: The major separation device of this unit is GNCD930G vertical cuttings dryer. It is the major separation equipment used for oil base mud and cuttings separation in oil and gas drilling field. There is a flush pump equipped for the modular to support continue running of the unit.

2023.02.23 Decanting Centrifuge

High speed oilfield decanter centrifuge separation modular. The major separation device is 14 inch high speed centrifuge GNLW363D-VFD, which is complete with centrifugal separation, variable frequency drive (VFD) control panel, feeding pump, and pipelines. German brand NETZSCH pump were equipped in the system to feed for the decanter centrifuge. It is the same brand as the flush pump of vertical cuttings dryer.

The major separation equipment are allocated inside a fabricated container. The major advantages of the containerized design is that, it is fast and convenient for fast movement and installation. And plus, it especially suits for the extremely cold weather in winter.

Screw conveyor is the most popular and normal transfer device for the drill cuttings transfer. GN Solids Control makes screw conveyor with auger size vary from 10 inch to 18 inch. And the transfer length from 12ft, 24ft, to 36ft and 48ft. GN Solids Control utilizes 12ft standard length for each auger section. The users can remove or insert a middle section to change the transfer length of the auger.

GN Solids Vacuum Pumps for drilling waste cleaning to Africa

GN Solids Control Sludge vacuum pump is a type of high load and strong suction capacity transferring pump which apply high vacuum pressure. The Sludge vacuum pump is also called as solids transferring pump, as well as drilling cuttings transfer pump.

GN Solids Control exported some solids and sludge vacuum pump for an Africa client. There is a big model sludge pump GNSP-40B and portable model GNSP-10B. GNSP-40B is the biggest model with skids mount. GNSP-10B is the most portable model with tyres for fast and easy movement. Besides the 2 models, GN Solids Control has another middle model GNSP-20B, it is also a portable pump with tyres.

2022.12.27 GNSP-40B Sludge Vacuum Pump

2022.12.27 GNSP-10B Solids Vacuum Pump

The vauum pump can be used in various industries, including oil and gas field, construction field, logistics, etc…
There is a wide application of GN Solids Control solids and sludge vacuum pump in oil and gas field, it includes but not only limited to below applications:

1. GN Solids Control vacuum pump can be used to clean and suck waste materials, harzardous material, and spilled mud and cuttings.

2. GN Solids Control vacuum pump can be used to clean waste pit and suck oil sludge.

3. GN Solids Control vacuum pump can suck and clean mud tanks, and clean tank bottom sludge and tank bottom wastes.

4. GN Solids Control vacuum pump can be used as industry vacuum cleaner to clean the spilled oil and spilled mud on tank surface and drilling rig platform.

5. GN Solids Control vacuum pump is widely used at offshore platforms to suck drilling cuttings, and then discharged to long distance away for transferring to on shore workshops for further waste management.

The unique structure design of GN Solids Control vacuum pump enables it is capable to work at the very tough circumstance. And as there is no rotating components inside the sludge and solids vacuum pump, it is with less maintenance. It is ideal equipment for transferring sludge with high solid content which can up to 80%. And plus, the sludge vacuum pump is also capable to be used for high specific gravity material.

GN Mute Solids Vacuum Pump for Tunneling Slurry Transfer

GN Solids Control makes various sizes vacuum pump for solids and sludge transfer. It is a type of powerful suction pump for long distance transfer.

Based on the standard models, GN Solids Control can make some customized design to suit some special applications.

2023.02.03 Sludge Vacuum Pump

Recently, GN Solids Control finished a mute type solids vacuum pump. The pump will be used for tunneling slurry transfer. The the tunneling activities are mostly taken in cities. High noisy is prohibited. Hence GN Solids Control designed and made a Sound insulation box to cover the vacuum pump. It is to reduce the working noisy into the accepted level for operations inside cities.

GN Solids Control sludge vacuum pump is also called as solids vacuum pump, or sludge vacuum pump. With the unique structure design, GN Solids Control vacuum pump is specially suits the very tough circumstance. As there is no rotating components inside the vacuum pump, it is more stable and with less maintenance. GN Solids Control vacuum pump can generate vacuum pressure for suction depths up to 10m. And the solids contents can suction sludge with solids content up to 80%.

GN Solids Control vacuum pump can be used to suck and transfer material in oil and gas drilling, and other industry application, it includes but not limited to below materials:

1. The drilling cuttings and other solids waste discharged from shale shaker, mud cleaner and centrifuge transfer in oil and gas drilling.
2. The drilling mud transfer in oil and gas drilling, as well as non-oil drilling activities.
3. Oil sludge, oil waste, or other waste material, tank bottom cleaning waste,etc…
4. Waste pit cleaning and other Hazardous waste recovery jobs
5. Barge holdings and vessel bottom clean out
6. Bulk tank and silo transfer of material
7. To suck and transfer Sand; Course, fine, conventional and frac sand of construction field
8. Mining instry material transfer
9. The pump can be used in farms, to transfer feed, animal waste, etc.