A three-phase decanter centrifuge is a type of centrifuge used in industrial processes for separating three different phases from a mixture, typically a liquid-liquid-solid mixture. This type of centrifuge is particularly useful in industries such as oil and gas, food processing, wastewater treatment, and chemical manufacturing. The mixture to be separated is fed into the centrifuge through a feed pipe. The mixture enters a rotating bowl within the centrifuge. The bowl rotates at a high speed, creating centrifugal force. This force causes the heavier particles (usually solids) to move towards the bowl wall while the lighter phases (liquids) form layers in between. As the mixture spins within the centrifuge, the heavier solids accumulate at the bowl wall due to centrifugal force. The two lighter phases, typically oil and water, separate based on their density, with the lighter phase forming an outer layer and the heavier phase forming an inner layer. Each phase is discharged separately through different outlets. The solids are discharged continuously through ports at the bowl periphery, while the separated liquid phases are discharged through separate outlets. The speed of the centrifuge and other operating parameters can be adjusted to optimize the separation process for different types of mixtures. Three-phase decanter centrifuges are highly efficient and can handle large volumes of mixture, making them valuable in industries where separation of multiple phases is necessary for processing or recycling purposes. They are often used in applications such as clarifying liquids, separating oil from water, and recovering solids from industrial wastewater. GN Decanter Centrifuge is designed for the drilling mud solids control and oilfield waste management. GN VFD drive decanter centrifuge with variable speed allows drilling contractor or mud service company to do the barite recovery, fine/ ultra fine solids separation, dewatering centrifuge. GN have the decanter centrifuge from 9 inch bowl to 22 inch bowl available for different applications. GN decanter centrifuge bowl length and diameter ratio is over 3, this gives the best result for the drilling fluids cleaning. With using the best of materials, such as SS2205 or SS2304 and Tungsten Carbide for tiles. GN centrifuges are better equipment when compared to the pricing of our competitors. Being third of the cost and with the same production and output. We are developing our machines with success and longevity for our clients.