3 sets GN rapidly removable mud recycling system for HDD rigs will probably be dispatched to the client now. It is customized system intended for CPP rigs. CPP executive team visit GN manufacturing and check the system previous to dispatch and very satisfied. They can be happy with the system top quality and thanks very much for any continue technical supporting associated with GN Solids Control for your years. Till now, they get over 35 sets lightweight mud cleaning systems through GN Solids Control. The majority of the systems are for 500GPM capacity.
The 3 new methods are customized system together with 500gpm also, but can easily up to 1000GPM capacity at will.
The 500gpm ~ a thousand GPM mud recycling devices are composed of below tools:
1) Mud tank one ea. The size of the tank is the same with 20ft common container, and equipped with ISO blocks. Walkways and handrails are all foldable type the design of fast movement. During regular shipment, the users no need to eliminate the walkways and handrails, that they only need to take off the personal identification number shaft and supporting column of walkway, and fold-up the walkway and handrails to the tank side wall structure.

2) Mud desander cleaner (model GNZS706E-2S) with dual deck shale shaker. It’s the combination of a double terrace shale shaker and only two each 10’’ desander cones. The bottom shaker deck may be used as solids control shale shaker for preseparation.
3) Mud desilter cleaner (model GNZS706E-8N) with a double patio shale shaker underneath. The base deck of the shaker to be used as solids control shale shaker.
The 1 expert advisor desander mud cleaner and also 1 ea desilter mud cleaner are mounted in the lifting frame, they can be transferred as a compete part while in shipment when needed.
4) Nourishing pump for desander as well as desilter cones are installed in the slope of the tank for a compact design.
With regard to other sizes of GN mud recycling system to get HDD rigs, please anyone visit GN website or even contact GN company to get details.

GN solids control produced mud handling equipments and mud tanks are mainly used for cleaning and recycling the used driling fluids from the well bore. The mud handling equipments range including:

Shale shaker, mud cleaner, desander, desilter, vacuum degasser, chemical mixing unit, jet shearing unit, mud agitator, bottom mud gun, shear pump, decanter centrifuge, vertical G cuttings dryer.

The mud tanks range including:shale shaker tank, trip tank, intermediate tank, suction tank, mixing tank, reserve tank, chemical tank, etc.

The mud handling tank will be installed on the mud tanks as solids control system for the drilling rigs. The shale shaker we can supply including 3 panel screen shaker, 4 panel shale shaker, 2 panel shale shaker, double deck shale shaker with scalping shaker deck. The scalping shaker deck usually with coarse mesh size to separate big solids, it could protect the main shaker screen and increase the cleaning performance.

The mud cleaner we can supply including desander unit, desilter unit and 3 in 1 unit, the 3 in 1 unit is the combination of desander cone, desilter cone and bottom shale shaker. The bottom shale shaker could be single deck shaker or dual deck shale shaker. The desander cone quantity and desilter cone quantity could be choosed for different treating capacity, our standard model including 500gpm, 1000gpm, 1500gpm mud cleaner. When the bottom shaker is with double deck, we will call it desander unit or desilter unit, it is usually works for construction works, like bored piles, tunneling, etc. Centrifugal pumps work as feeding pump of the mud cleaners.

If you need mud handling equipments with mud tanks and drilling mud system, pls contact with GN solids control in Beijing, China or GN solids America in Houston, USA, we have the main mud handling equipments in stock for immediate shipment.

The ongoing lower price of crude oil doesn’t hold the step of oil and gas market, since the crude oil and petrol is always needed by the modern world, the oil and gas related companies still have to work on the oil and gas exploring and drilling, just try to reach it at a lower cost. That’s why in the coming Oil Show to be held in April in Russia, Chinese brands become more and more popular.

But the oil companies don’t want to sacrifice the quality although on a much lower price, and accordingly, the most cost-effective solutions become their beloved choice. GN Solids Control, who produces and provides the internationally best quality of products and at a reasonable made in China price, becomes the best choice of the drilling companies and oil service companies.

This time, for the Moscow oil show 2016 which is scheduled in April, GN will bring the most updated GNLW363CG Decanter centrifuge and GNZS594E shale shaker to the oil show, and also its durable and effective shaker screens.

GN has attended Moscow oil show for several years. Each year, GN brought the newest designed products to the clients, and GN sales team supported lots of Russian companies. GN produces are certified by Russian TP & TC, welcomed by Russian market.

Main factors of GNLW363CG:

Bowl diameter 14 inch.

Bowl length: 50 inch.

Max speed: 3900RPM

Typical speed: 3200RPM.

Typical G force 2062

Main factors of GNZS594E drying shaker:

Linear motional.

616 RPM treating capacity.

Vibration G force up to 8.0.

Screen size 1165*585MM

Screen area: 2.73 sqm

If you have plan to go to Moscow oil show, pls contact us and confirm a time for meeting, And GN has office in Moscow for your easy contact at any time.

CIPPE 2016 is just just about to happen, you may still remember recently, on CIPPE 2015, GN brought many new developed products that covers almost all areas where GN’s products can be applied. Though in 12 months of 2015, the olive oil business faced the unrivaled recession in worldwide, GN Solids Control still held the steps to improve the products top quality and never gave up the investment decision on innovation. In the approaching CIPPE 2016, it is considered that GN’s booth will probably shine again with the fresh developments.
Below information concerning GN at CIPPE 2016
• Address: New China Worldwide Exhibition Center, Beijing; Number 88, Yuxiang Road, Tianzhu, Shunyi District, Beijing
• Time: March 29-31, 2016
• GN Booth No .: HALL E2 -E2200, booth area 272m2.
• Plane graph: http://public.cippe.com.cn/static/hall/2015bj/hall_e1.jpg
• Appointment email: sales@gnsolidscontrol. com
• GN Factory Location: 40KM into the Exhibition Center (40 Moments Drive)
In the event of 2015, GN Solids Control brought 1 unit drilling waste cuttings management system which is the most popular sellers in GN’s products line in the year connected with 2015. One skid wilt removable telescopic frame sets up all the equipment into a small unit. This unit can be transported by a trailer without having removing the equipment on it. Along with fully consideration on the handling diagram, this system is definitely including vertical cuttings dryer unit, VFD decanter centrifuge and relative transferring pump. GN also have modular design and style equipment could be ordered individually and then assembled on web-site according to specific onsite area condition. Modular design waste materials cuttings equipment could be a lot more freely layout onsite.
In addition to the waste cuttings management system, the traditional drilling fluids solids control equipments were also exposed to GN’s booth. High Gary the gadget guy force drying shaker, mud cleaner unit, 22 ” big bowl decanter centrifuge and even the piling undertaking used de-sanding unit were being shown there, which makes visitors sigh with emotion since GN could provide the total line solids control in addition to waste disposal equipment for different industries like oil going, no dig drilling and perhaps construction projects.
2016 is usually fully a fresh new year to get GN Solids Control, while GN was just accorded as New High-tech Party. With this honor, GN wish to show herself at the CIPPE 2016 with a new image. Brand new development on products will certainly be shown there to seize clients’ eyes. Expecting experiencing you again at CIPPE 2016.

GN Solids Control is doing motor drive centrifuge for over 5 years. After these years, GN centrifuge design, quality, working performance, working lifetime is reach World Class standard, competing with Derrick centrifuge, Swaco centrifuge, Nov brandt king cobra centrifuges. To provide more centrifuge choice, GN Solids Control is doing research on Hydraulic drive centrifuge, and this new type centrifuge will be shown at CIPPE 2016.

GN Solids Control is exporting lots of high quality, good price to international clients in oil gas drilling, HDD drilling, CBM drilling, water well drilling industries. Recent exporting project including but not limited to below cases.

Case 1: GN mud mixing system is exporting to Middle East

The client is GN old clients who bought one set 500gpm drilling mud system. Up to now, the performance is still very good. This save lots of cost and work time for client, also win good fame for client, more and more projects coming to the HDD drilling customer.

Case 2: GN mud cleaning system is exporting to Middle East for Water well drilling

The water drilling client buy one set 200gpm mud system from GN in 2014; after knowing more about GN, the buyer repeat two sets 500gpm mud cleaning system for water well drilling, with customized color of shale shaker, mud cleaner, mud tank, etc.

Case 3: GN Decanter centrifuge is exporting to Africa drilling market

GN Solids Control decanter centrifuge is mainly used for solids control / drilling waste management. The high quality centrifuge replace many US brand centrifuges in the market. GN centrifuge is replacement centrifuge for Derrick centrifuge, Swaco centrifuge, NOV brandt centrifuge.

Buying centrifuge from GN Solids Control, the client can get the best selected centrifuge from China, most cost-effective. We have one client firstly only test 1-2 sets centrifuge. After 3 years, the client place order of over 30 sets centrifuges.

GN Solids Control is committed to offer top quality solids control equipment. Pls contact us freely if you need some.

In this article, we mainly introduce GNLW223 Decanter Centrifuge, 1 mini centrifuge with high quality and perfect performance comes to mass production in GN Solids Company.

Until now, GN has the full range of decanter centrifuges from the big treatment capacity to small treatment capacity. For these centrifuges, the different rotate speed, different voltages and frequencies, fixed speed or variable speed, high or low configurations are also availablefor customer options.

Compared with the other types of Decanter Centrifuge made by GN Solids Control Company, the most obvious symbol of this Mini Decanter Centrifuge is itsvery small treatment capacity in unit time and higher speed. The details are as below,

• Max treatment capacity is 9m³/h (40GPM);
• Max speed is 4500RPM;
• Bowl diameter is 9 inches;
• Separation Point is 2-5μm；
• Besides, there are 2 types of speed for customer option. 1 is fixed speed and the other 1 is variable speed.

GNLW223 Mini Decanter Centrifuge is widely used for separating out very fine solids particles when customer needs the small treatment capacity, which is especially used in like the Diamond Core Drilling, Industrial Waste Water Management, Mining Industry and so on.

As its small treatment capacity and mini structure, GNLW223 Mini Decanter Centrifuge gets the good reaction from the global customers once goes into the market.

For the North America Market, until now GN Solids Control company has sold 15 units to the Canada, 2 units to the America and 3 units to the Chile.

The Project for Canada’s Customer – 10 Units GNLW223 Mini Decanter Centrifuge

The Project for Chile’s Customer – Solids RemovalSystem with GNLW223 Decanter Centrifuge Configured

If any customer is interested to this Mini Decanter Centrifuge, the following details are needed to provide to us so that GN Solids Control company could confirm if our product could meet your requirement in advance. As below,

• Solid Content of Fluid;
• Specific Gravity of Fluid;
• Viscosity of Fluid;
• Main Solid-phase Composition of Fluid;
• Solid-phase Particles Size Distribution;
• Source of Fluid;
• Expected Treatment Capacity.

Explosion proof is firmly requested on oil drilling site for the application of motors and control panel. This is to secure the safety of operation as there will be hazardous and flammable gas on the drilling site.

From the beginning of GN company establishing. GN provided drilling mud system to oil field with explosion proof standard electric motors and control panels. Till now, GN has enriched the motors and control panels that provided with different Ex. Proof certification and up to hazardous Zone 1 area application.

GN is able to provide Ex. Proof items with certification of IEC and ATEX. In regards to the motors, GN can provide certified units with CSA, UL and IEC. These certifications would meet demand of customers from the Canada and USA and some other areas.

This is really good news for both GN and the customers from North America. GN Solids Control got the opportunity to supply the mud system to North America, in the meantime, the customer can get the motor with a cost saving price. GN’s business will be expanded greatly in this market, as a feedback, the customer will get mud system with top quality and reasonable price.

However, not all the mud system in drilling project will request Ex. Proof motor and control panel just like the HDD and water well drilling. For some cost saving purpose, the non-Ex proof motor and panel will be used in the mud system. This type drilling is not so deep, and no flammable gas will be come out from the underground, the sparks produced during the electric devices running will not ignites the flammable gas.

GN is always focusing on higher level customer and providing high standard products, which means the motors GN provided could be non-Ex. Proof , while all the control panel in GN’s mud system are explosion proof standard.

Experienced sales guys know how to ask question to clients and get the required information so that he or she could make an accurate and timely quotation to the clients. This is the common rules for the sales guys in all the industries. It makes no exceptions for the sales of drilling mud system.

Drilling mud system is used to match the drilling rig for recycling the drilling fluids to reduce the drilling cost. Comparing with the single drilling fluids solids control equipment, the mud system is consisting of many equipment and mud tanks. Mud system is much complicated. So, if a sales guy wants to give a quote to the clients, he should know what the client’s request is. However, sometimes even the clients don’t what information would be helpful for sales guys to make a quote.

Here, we would like to share a knack for all the sales guys who want to serve the clients better and save the communication time before quoting.

In regards to the drilling mud system for oil & gas drilling, when client’s inquiry is coming, we would like to know some key information. What is the Horse Power of the rig? What is the loading capacity of the rig hook? And how deep you want to drill? In fact, so long as we got answer of any one question, then we are able to give the client commercial and technical quote. Such as the China model ZJ40, if we got this model, we will know this rig can drill down to 4000 meters, the hood capacity is around 225 metric ton, and the rig Horse Power is 1000. Here we say the HP is for the rig winch. And then we will get what is the flow rate of the used drilling mud, and how many mud tank this rig will need for storing active mud. GN Solids Control always has the standard configuration for rig from 550 HP to 3000 HP.

Together with the commercial offer, for the mud system quote, GN solids control  is willing to provide a technical offer including the drawing of equipment layout and working diagram. This would be much helpful to clients to understand how GN’s mud system works and what equipment involved in this mud system.

The mud agitator is very common equipment in the drilling mud recycling system. While it is not the primary solids control equipment to separate the drilling cuttings from the used drilling fluids. Nevertheless, in a complete mud recycling system, the mud agitator is indispensable equipment, especially for large volume requirement drilling mud recycling system.
If you have the chance to a drilling site, you may see several mud tanks beside the drilling rig unit. On the mud tank, there are shale shakers, de-sander & de-silter. Sometimes, you can also see the centrifuge unit. If you step on to the tank top, you may see the mud agitator unit installed with its rotating shaft insert into the drilling fluids inside the mud tank. So, now the question is coming, where should we install the mud agitator unit? And the answer is anywhere you want so long if there is enough space for you to install a mud agitator unit.

It is obvious that the tank compartment for shale shaker and mud cleaner don’t have enough space to install a mud agitator as the tank top is all occupied by the shaker body. Mud agitator is used to keep the mud chemical suspending in the drilling fluids, so the chemicals will not sedimentation down to the tank bottom. The property of the drilling fluids will be kept same for better performance under the drilling well.
The vacuum degasser used in drilling mud system to remove the gas in the drilling fluids to increase the pump working efficiency. GN design vacuum degasser has a long suction pipe to suck the drilling fluids from inside mud tank. It can functions as a agitating unit. So, there is no need for a mud agitator unit in the vacuum degasser compartment.
Suddenly, we found there are several mud tanks with no big equipment on top. However, we found there are many unit mud agitators on it. Yes, this type mud tanks are called mud storage tanks which are used especially for active drilling fluids storage. On the top of the tank, averagely each 10 feet, there will be a mud agitator. For some deep drilling project, it needs many mud storage tanks to keep enough active drilling mud. The request of the mud agitator would be a large quantity.
Here we got the conclusion, the mud agitator is always be installed in the mud system where on top of the mud tank there will be enough space to put it. The most common application is to locate it on the drilling fluids storage tank for prevent mud chemicals sedimentation.

We have one client from Africa, buy our shaker screen from 2013. But never have a chance to try our decanter centrifuge. At the beginning, they cannot accept the high price compared with other China supplier, and they buy 3 sets centrifuge from a cheaper price centrifuge supplier. But after two years, they may have some working performance and come to our company for assistance.

After several email discussion and phone calling, we know the requirement well. The main requirement technical points including:

Decanter centrifuge for urgent project, 1 ea

Use it for solids control, barite recovery / mud weight cutting

No need screw pump, because they have one set in stock

No need spare parts for now. and they may need it after 3-5 rigsite, about one year later.

The client has a tight budget about 60000 dollars invest.

After we know it clearly, we recommend our high standard high speed fixed speed centrifuge out of below reasons.

1) GNLW363CG fixed speed centrifuge, high standard, with 3200rpm /2500rpm /2200rpm three speed for option.

2) We match 2500rpm pulley on centrifuge when delivery. This speed can match most of the conditions requirement, and offer 2200rpm /2500rpm pulley with belt for backup applications.

3) We offer one tools box with tap and other special tools specialized for pulley replacement. And also will offer instruction with words & pictures to make it clearer.

After client knows the delivery status with cargo & backup tools, they are very satisfied with our support. And will repeat order for another 2 or 3 sets decanter centrifuge in the coming New Year. The client is local professional solids control service contractor, they have ongoing requirements for solids control equipment, especially for decanter centrifuge, shaker screen, screw pump, shale shaker etc. We want to support client in best to keep long term relationship.