Monthly Archives: December 2015

Where should Install the Mud Agitator Unit in Drilling Mud Recycling System

The mud agitator is very common equipment in the drilling mud recycling system. While it is not the primary solids control equipment to separate the drilling cuttings from the used drilling fluids. Nevertheless, in a complete mud recycling system, the mud agitator is indispensable equipment, especially for large volume requirement drilling mud recycling system.
If you have the chance to a drilling site, you may see several mud tanks beside the drilling rig unit. On the mud tank, there are shale shakers, de-sander & de-silter. Sometimes, you can also see the centrifuge unit. If you step on to the tank top, you may see the mud agitator unit installed with its rotating shaft insert into the drilling fluids inside the mud tank. So, now the question is coming, where should we install the mud agitator unit? And the answer is anywhere you want so long if there is enough space for you to install a mud agitator unit.

Mud Agitator
It is obvious that the tank compartment for shale shaker and mud cleaner don’t have enough space to install a mud agitator as the tank top is all occupied by the shaker body. Mud agitator is used to keep the mud chemical suspending in the drilling fluids, so the chemicals will not sedimentation down to the tank bottom. The property of the drilling fluids will be kept same for better performance under the drilling well.
The vacuum degasser used in drilling mud system to remove the gas in the drilling fluids to increase the pump working efficiency. GN design vacuum degasser has a long suction pipe to suck the drilling fluids from inside mud tank. It can functions as a agitating unit. So, there is no need for a mud agitator unit in the vacuum degasser compartment.
Suddenly, we found there are several mud tanks with no big equipment on top. However, we found there are many unit mud agitators on it. Yes, this type mud tanks are called mud storage tanks which are used especially for active drilling fluids storage. On the top of the tank, averagely each 10 feet, there will be a mud agitator. For some deep drilling project, it needs many mud storage tanks to keep enough active drilling mud. The request of the mud agitator would be a large quantity.
Here we got the conclusion, the mud agitator is always be installed in the mud system where on top of the mud tank there will be enough space to put it. The most common application is to locate it on the drilling fluids storage tank for prevent mud chemicals sedimentation.

GN Decanter centrifuge for shaker screen client

We have one client from Africa, buy our shaker screen from 2013. But never have a chance to try our decanter centrifuge. At the beginning, they cannot accept the high price compared with other China supplier, and they buy 3 sets centrifuge from a cheaper price centrifuge supplier. But after two years, they may have some working performance and come to our company for assistance.

decanter centrifuge

After several email discussion and phone calling, we know the requirement well. The main requirement technical points including:

Decanter centrifuge for urgent project, 1 ea

Use it for solids control, barite recovery / mud weight cutting

No need screw pump, because they have one set in stock

No need spare parts for now. and they may need it after 3-5 rigsite, about one year later.

The client has a tight budget about 60000 dollars invest.

After we know it clearly, we recommend our high standard high speed fixed speed centrifuge out of below reasons.

1) GNLW363CG fixed speed centrifuge, high standard, with 3200rpm /2500rpm /2200rpm three speed for option.

2) We match 2500rpm pulley on centrifuge when delivery. This speed can match most of the conditions requirement, and offer 2200rpm /2500rpm pulley with belt for backup applications.

3) We offer one tools box with tap and other special tools specialized for pulley replacement. And also will offer instruction with words & pictures to make it clearer.

After client knows the delivery status with cargo & backup tools, they are very satisfied with our support. And will repeat order for another 2 or 3 sets decanter centrifuge in the coming New Year. The client is local professional solids control service contractor, they have ongoing requirements for solids control equipment, especially for decanter centrifuge, shaker screen, screw pump, shale shaker etc. We want to support client in best to keep long term relationship.

1500hp rig solids control equipment delivery to Russia

Together with GN Solids Control The ussr office going on operation, GN Solids Control Equipment is living in more market share in Russian federation and Surrounding Russia-Speaking nations. Recently, we ship 1 batch of solids control equipmentto Russia Drilling Organization, the equipment is for 1500hp olive oil drilling rig operation.
1) 4 sets of shale shaker, GNZS594E-HB.
This shale shaker is 4 panel shakers with big managing capacity, working performance comparable to USA brand shakers. Typically the vibration motor can be – 72kw /1. 94kw intended for option, G force is actually adjustable by adjusting often the eccentric block inside of the heurt motor.
The shaker screen is important spare parts for shaker. We can offer both carbon dioxide steel frame shaker screen with economic cost and composite material frame shaker screen with longer life span, price is higher than carbon stainlesss steel frame screen, performance is way better.
The shaker screen is usually locked by wedges, could be hammer out or sludge hammer in, very convenient with regard to jobsite operation.

decanter centrifuge 3
2) a couple of sets of decanter centrifuge, GNLW363CG
The client buy 2 sets of same unit centrifuge GNLW363CG for much easier operation and less spare parts inventory. The centrifuge is top speed centrifuge can reach 3200RPM, and G force 2062@3200RPM. We can also match reduced speed pulley with seatbelt per client’s request.
In this particular order, we provide one placed centrifuge @2700RPM for mud weight cutting & a single set centrifuge @2200RPM to get barite recovery. centrifuge@3200RPM may be used to remove ultra-fine solids as well as waste water treatment.
GNLW363CG is high standard centrifuge for better performance, competing along with USA/Europe brand centrifuge. We can easily also offer economic standard centrifuge GNLW452C@1800RPM middle speed centrifuge professional barite recovery. The customer can select different centrifuge model by considering centrifuge application & project spending budget.
3) 20 sets regarding centrifugal pump
The pump is for over 5 olive oil drilling rigs application. The particular centrifugal pump is kinetic seal, performance equivalent to Vision Magnum pumps. The pump can be used for feeding mud cleaner desander cones, desilter cones; transferring mud in/out etc .
If you are client requiring solids control equipment, please contact us freely. We have three or more base below:
GN Solids Control, China Beijing Hq & factory
GN Solids America LLC, office and also warehouse
GN Solids Spain, office and warehouse.

GN Mud Recycling System shipped to Asian Consumer

GN Solids Control Corp., Ltd has manufactured more than thousands of solids control in addition to drill cuttings management techniques. Many mud recycling system are widely used in coal and oil area, some of them are using throughout no dig drilling, for example bored pile construction place. Some days before, GN Solids Control just delivered 3 units of mud taking system for clients who will be using bored piles within Asia.


Now many countries are choosing GN advanced mud trying to recycle systems in the no look area, countries such as Singapore, Myanmar, Australia, Saudi Persia etc .
GN manufactures lightweight mud systems, all of them could be moved very conveniently. The treatment of capacity varies from 250GPM, 500GPM as well as 1000GPM. These kind of mud systems are mainly such as the following parts:
1 . GN Shale Shaker
GN shakers are very popular to separate solids that larger than 100 microns. Now GN is cooperating with world famous brands sto? motors, such as Martin or maybe OLI. These motors can be utilized for quite a long time without cracked. GN also manufactures his personal shale shaker screens. As there are various screen types, GN use the best quality wire mesh to help manufacture the shaker window screens.
2 . GN Hydro Cyclones
Hydrocyclones are used to separate solids above 25 microns using the size. There are 10 in . and 4 inch cyclones which are very effective to do typically the separation. Some cyclones can be used together in order to have different healing capacity.
GN cyclones are made from polyurethane, which are wear evidence for long time usage.
a few. GN Mud Tank
GN shaker and cyclones are usually fixed on the top of one sleek and stylish mud tank. Some other auxiliaries such as centrifugal pump (fixed on the bottom frame) and light (fixed on the top) are also incorporated for convenient usage.
GN also provides customized mud tank to meet different worksite demands. Welcome to connect with each of our GN Solids America LLC for more details.

GN Solutions of Zero Release of Drilling Cuttings

In the past several years, GN Solids Control has been developing very quickly originating from a new brand to a in the world well known company which is often known as one of the main and leading solids control manufacturers in planet. When you talk about the oil and coal solids control systems supply by china manufacturer, with good quality and trusted service, GN Solids Control is the first name this comes across your mind.
Solids control and drilling waste management is not just important for the oil and gas drilling industry, but also benefit a good deal for the whole environment of the world, specially the waste management methods. If the solids control devices is for the benefit for the going companies because the drilling mud recycling reduces their fee for drilling and help often the driller to re utilize valuable drilling liquid.

GN Waste Management System
Yet regarding the drilling cuttings dismissed the solids control system, there are different ways to treat. Despite the fact that in some under developed places there are still some places where the particular drilling cuttings could be got rid of directly to some barren spot or buried underground, many people get to admit that this kind of drilling cuttings could eternally ruin the land along with underground water, and more plus much more governments are establishing rules to regulate the drilling companies’ behavior and zero released solutions seem a must intended for future drilling. GN Solids Control, as the first API Certified China solids control manufacturer, has come to a number of solutions for different levels needs. Including but not limited because following:
1 . GNZS594HGE-LD high-G drying shaker and GNLW363CG-VFD high speed decanter centrifuge, in hopes of further drying of h2o based mud solids release,
2 . GNCD930D Vertical cuttings dryer and GNLW363CG-VFD broadband decanter centrifuge, mainly for even more drying of both h2o based mud and oil-based mud solids discharge,
several. GNGH15A Solidification system with regard to final treatment of drilling cuttings, and making the liquidate factors in the drilling cuttings to become stabilized and no longer injury to the environment.
May you have much more interest, welcome to contact us widely.

GN Shaker screen for Trading company

Recently, we have one big order for replacement screen for Mongoose shaker. The client has a strong relationship with local biggest oil drilling company and gives us repeat order. The client bought one batch of screen 800pcs last year. After the client use the screen, they are very satisfied with the working performance & lifetime. And this year, they repeat order to the local trading company and the trading company comes to our company again.

What is the reason for repeat order? Quality, off course.

GN Solids Control as the leading manufacturer for solids control & drilling waste management equipment, our principal is “quality first, price second”. For the project in oil drilling rigsite, one hour equipment problem may cause lots of money, much higher than equipment itself cost. That is why we emphasize so much on high quality solids control equipment. Except for shaker screen, we also provide high quality shale shaker, centrifuge, mud cleaner, vertical dryer, mud agitator, centrifugal pump etc.

steel-frame-screen

GN high quality centrifuge is super star of GN solids control equipment. GN has at least over 300 sets centrifuge working all over the world. We sales amount for each year of centrifuge can reach to 150sets. The high quality of centrifuge is made of below materials:
Bowl Cylindrical and Conical section made from Duplex Stainless Steel 2205 by centrifugal casting.
Other Parts of the bowl assembly material: stainless steel SS316L
Screw protection: Tungsten Carbide Tiles for longer life and easier replacement.
Screw flow distribution port and bowl solids discharge port protected by tungsten carbide alloy.
Easily adjustable liquid discharge weir height for flexible application.
Bowl assembly supported by tighten belt for protection of bearing in moving.

For centrifuge, we have different model for different options. Like small centrifuge for diamond drilling, high speed centrifuge for fine solids separation, big bowl big volume centrifuge for fast drilling etc. From this year, we have stock for centrifuge over 20 sets, if you have urgent project, pls contact us freely.

GN vertical cuttings dryer with regard to drilling cuttings treatment

GN Solids Control is primary manufacturer for Vertical cuttings dryer ( Verti-G dryer) & decanter centrifuges, that are key equipment for solids control & drilling cuttings treatment. Up to now from this, we already exported above 300 sets centrifuges and 50 sets vertical cuttings dryer to international essential oil drilling field and home-based drilling companies. The high quality performance and reasonable price tag win good reputation intended for GN Solids Control.

Not long ago, our after sales team simply come back from an Africa Going Company rigsite. ( Most of us call it ADC with this chapter). ADC is a going company with 7 territory drilling rigs and all the particular rigs is under going process. From 2013, ADC contact our company and go to our factory (location is near Beijing) many times. After that, ADC issue many big instructions to us, totally like:
Verti-G dryer
1) 5 sets Verti-G dryer for drilling cuttings treatment, attached with:
your five sets high skid to put in the vertical cuttings dryer,
5 sets screw pump for flushing the Verti-G dryer,
15 sets twist conveyor to transfer going cuttings for feeding as well as for discharge.
5 pieces one year recommended spare parts.
2) 14 sets decanter centrifuge for drilling mud solids control, attached with:
36 sets screw pump regarding feeding decanter centrifuge
18 sets one year recommended replacement components.
3) 1000pcs replacement shale shaker screen for Derrick shale shaker / MI-Swaco mongoose shale shaker.
Formerly, ADC rent centrifuge service or Verti-G dryer service through Third Party Service Company. To reduce in the long run production cost, they tend to buy equipment from people and use their own reduce weight do the job well. As they hold the equipment, the use time is quite a bit flexible and surely, the complete cost in long term is significantly lower that rental services.
GN Solids Control is usually China No . 1 model solids control equipment company. We only top upon high quality equipment with realistic price. With many years expertise, the performance of GN products is almost same as ALL OF US products. Meanwhile, we offer assured after sales service to educate the buyer engineers, to make sure the tools correct operation.

The Differences Between Centrifuge and Pressing Filter

GN Decanter Centrifuges tend to be effectively used in OBM and also WBM separating. Now a lot more than sixty countries are using GN decanter centrifuges to treat the actual oil sludge. For the tool cuttings management, there are several various ways. Decanter centrifuge and pushing filter are two kinetic ways to treat the OBM, WBM or SBM.
Because of the working principle of GN decanter centrifuge and important filter is not the same, there are several main differences between them.
1 ) GN decanter centrifuge
GN decanter centrifuge is using the law of gravity difference to separate solids with assorted sizes. The rotating dish and screw propeller run with different speed. When water sent into the decanter centrifuge, solids and liquid is going to be separated around the circle in the inside rotating bowl. Is considered obviously to know that bigger solids has larger centrifugal force will help to push all of them from the solids discharge slot and from mud pastry.
GN decanter centrifuges are incredibly easy to operate and near maintenance. The rotating jar and screw propeller are choosing excellent materials for use resistance. GN also use tungsten carbide tiles to protect mess propeller, which also very simple change. At the beginning of this year, GN Solids Control provided around 30 sets decanter centrifuges to one oil service company within Africa. Now they are working obviously.

“GN decanter centrifuge”的图片搜索结果
2 . Press Filter
Hit filter is another mechanical approach to separate solids. It typically takes large room. Some specific filtering materials are used to independent the solids by applying with various pressure. Those filter music need to be cleaned with high force water frequently in order to have the separating performance. From the functioning cost, GN decanter centrifuges are more cost effective than media filter because the filter had to be cleaned by several labors.
Now GN decanter centrifuge and cuttings dyer plus the solidification unit are very well-liked in drilling waste management, waste water cleaning and so on GN solids control and also drilling waste management techniques are also used in some other areas.