GN five hundred GPM mud recycling system is one of the most hot purchase system model for horizontally drilling directional drilling (HDD), water well drilling, CBM drilling, as well as for some little workover rigs.
Water nicely drilling is very important; it is not just used for human being life as well as industry purpose. For coal and oil drilling field, it is also extremely important. Before start the procedure of oil drilling, the actual jobsite need to drill drinking water well. As all the drilling activities need to use drinking water. They have to ensure water provider before start drilling coal and oil well.
One set movie trailer mounted GN 500 GPM mud recycling system turn up client job site as well as highly commended by the customers. The GN 500 GPM drilling mud system is made for 1000m deep water nicely drilling. It can also suit with regard to 350hp drilling rigs as well as ZJ20, ZJ30 drilling rigs.
It is a complete mud system including mud treatment system and mud mxing system, as well as electric control system. GN reserves a spare link on the inlet and store pipe of the mixing pump. The system can be used to blend mud in outside aquariums, and it can transfer qualified mud to outside tanks. Customers can connect the outside storage space tank directly.

The GN 500 GPM mud system is a customized system for each clients’ request. The system is including following gear.
1) Solids Control shale shaker, model GNZS703E. This is a linear motion shale shaker with 3-panel. Its capability is 500GPM.
2) Mud cleaner GNZJ703E-D8N. It is a mixture of shale shaker and desilter cleaner.
3) Mud mixing system
4) Mud tank and accessories.
Besides this particular proposal, GN Solids Control offers different standard mud system to cater for various jobsite condition. GN possess below standard design for 500gpm mud system:
1) The actual economic standard GNMS-500B mud recycling system
2) The standard standard GNMS-500G mud system.
3) The high standard GNMS-500GL mud system. Compare with over proposal, this model comes with more treatment process along with a bigger usable tank capability.
GN company keeps with regard to standard mud system and equipment including mud agitator, Decanter Centrifuge ,Mud Gas Separator, cuttings dryer, Vacuum Degasser, Mud cleaner,shale shaker, pleasant you contact GN with regard to inquire.

Hebei GN Solids control company LLC is China leading manufacturer for drilling mud solids control equipment and drilling waste management equipment. Its brand name is GN Solids Control.

GN Solids control offers one stop solution for drilling rig fluids, from mud solids control until the drilling waste management treatment system.

As the first API certified solids control manufacturer from China, GN Solids Control aims on China top market and the international market. 70% of GN Solids Sales is from international market. GN Solids Control keep improving to cater for the higher and higher request of the international market clients. With its fast development, GN Solids Control is among the leading solids control mafanucturers from all over the world and establish a famous brand: GN Solids Control.

In order to offer a more efficiency services to clients, GN Solids Control upgraded its company website, to offer a better visual effect website. It can suit for the mobile reading equipment.

The new website of GN Solids Control is much more readable. And the new menus can hopes the visitors to find the suitable equipment and information more fast.

Further more, GN Solids Control upgrade its company logo. All equipment documents and new equipment will start to use the new logos from now on.

Below is some of the advantages of GN Solids Control

1) GN is the First API certified solids control equipment manufacturer coming from China.

2) GN Solids America LLC is the first USA based solids control company from China.

3) No. 1 in China for direct exporting of mud solids control and drilling waste management equipment. GN Products have been exported to over 60 countries and regions, with  partners and branches in USA, Australia, Latin America, Middle East, Africa etc.

4) GN  Owns over 10 patents for solids control and drilling waste management equipment.

GN offers one-stop and turn-key solution for solids control and drilling waste management.

GN keeps research and develop the best technology to manufacture top quality Shale shaker, mud cleaner, desander, desilter, vacuum degasser, mud mixing system, jet shearing unit, mud agitator, bottom mud gun, shear pump, decanter centrifuge, vertical G cuttings dryer for our clients.

3 sets GN rapidly removable mud recycling system for HDD rigs will probably be dispatched to the client now. It is customized system intended for CPP rigs. CPP executive team visit GN manufacturing and check the system previous to dispatch and very satisfied. They can be happy with the system top quality and thanks very much for any continue technical supporting associated with GN Solids Control for your years. Till now, they get over 35 sets lightweight mud cleaning systems through GN Solids Control. The majority of the systems are for 500GPM capacity.
The 3 new methods are customized system together with 500gpm also, but can easily up to 1000GPM capacity at will.
The 500gpm ~ a thousand GPM mud recycling devices are composed of below tools:
1) Mud tank one ea. The size of the tank is the same with 20ft common container, and equipped with ISO blocks. Walkways and handrails are all foldable type the design of fast movement. During regular shipment, the users no need to eliminate the walkways and handrails, that they only need to take off the personal identification number shaft and supporting column of walkway, and fold-up the walkway and handrails to the tank side wall structure.

2) Mud desander cleaner (model GNZS706E-2S) with dual deck shale shaker. It’s the combination of a double terrace shale shaker and only two each 10’’ desander cones. The bottom shaker deck may be used as solids control shale shaker for preseparation.
3) Mud desilter cleaner (model GNZS706E-8N) with a double patio shale shaker underneath. The base deck of the shaker to be used as solids control shale shaker.
The 1 expert advisor desander mud cleaner and also 1 ea desilter mud cleaner are mounted in the lifting frame, they can be transferred as a compete part while in shipment when needed.
4) Nourishing pump for desander as well as desilter cones are installed in the slope of the tank for a compact design.
With regard to other sizes of GN mud recycling system to get HDD rigs, please anyone visit GN website or even contact GN company to get details.

GN solids control produced mud handling equipments and mud tanks are mainly used for cleaning and recycling the used driling fluids from the well bore. The mud handling equipments range including:

Shale shaker, mud cleaner, desander, desilter, vacuum degasser, chemical mixing unit, jet shearing unit, mud agitator, bottom mud gun, shear pump, decanter centrifuge, vertical G cuttings dryer.

The mud tanks range including:shale shaker tank, trip tank, intermediate tank, suction tank, mixing tank, reserve tank, chemical tank, etc.

The mud handling tank will be installed on the mud tanks as solids control system for the drilling rigs. The shale shaker we can supply including 3 panel screen shaker, 4 panel shale shaker, 2 panel shale shaker, double deck shale shaker with scalping shaker deck. The scalping shaker deck usually with coarse mesh size to separate big solids, it could protect the main shaker screen and increase the cleaning performance.

The mud cleaner we can supply including desander unit, desilter unit and 3 in 1 unit, the 3 in 1 unit is the combination of desander cone, desilter cone and bottom shale shaker. The bottom shale shaker could be single deck shaker or dual deck shale shaker. The desander cone quantity and desilter cone quantity could be choosed for different treating capacity, our standard model including 500gpm, 1000gpm, 1500gpm mud cleaner. When the bottom shaker is with double deck, we will call it desander unit or desilter unit, it is usually works for construction works, like bored piles, tunneling, etc. Centrifugal pumps work as feeding pump of the mud cleaners.

If you need mud handling equipments with mud tanks and drilling mud system, pls contact with GN solids control in Beijing, China or GN solids America in Houston, USA, we have the main mud handling equipments in stock for immediate shipment.

The ongoing lower price of crude oil doesn’t hold the step of oil and gas market, since the crude oil and petrol is always needed by the modern world, the oil and gas related companies still have to work on the oil and gas exploring and drilling, just try to reach it at a lower cost. That’s why in the coming Oil Show to be held in April in Russia, Chinese brands become more and more popular.

But the oil companies don’t want to sacrifice the quality although on a much lower price, and accordingly, the most cost-effective solutions become their beloved choice. GN Solids Control, who produces and provides the internationally best quality of products and at a reasonable made in China price, becomes the best choice of the drilling companies and oil service companies.

This time, for the Moscow oil show 2016 which is scheduled in April, GN will bring the most updated GNLW363CG Decanter centrifuge and GNZS594E shale shaker to the oil show, and also its durable and effective shaker screens.

GN has attended Moscow oil show for several years. Each year, GN brought the newest designed products to the clients, and GN sales team supported lots of Russian companies. GN produces are certified by Russian TP & TC, welcomed by Russian market.

Main factors of GNLW363CG:

Bowl diameter 14 inch.

Bowl length: 50 inch.

Max speed: 3900RPM

Typical speed: 3200RPM.

Typical G force 2062

Main factors of GNZS594E drying shaker:

Linear motional.

616 RPM treating capacity.

Vibration G force up to 8.0.

Screen size 1165*585MM

Screen area: 2.73 sqm

If you have plan to go to Moscow oil show, pls contact us and confirm a time for meeting, And GN has office in Moscow for your easy contact at any time.

CIPPE 2016 is just just about to happen, you may still remember recently, on CIPPE 2015, GN brought many new developed products that covers almost all areas where GN’s products can be applied. Though in 12 months of 2015, the olive oil business faced the unrivaled recession in worldwide, GN Solids Control still held the steps to improve the products top quality and never gave up the investment decision on innovation. In the approaching CIPPE 2016, it is considered that GN’s booth will probably shine again with the fresh developments.
Below information concerning GN at CIPPE 2016
• Address: New China Worldwide Exhibition Center, Beijing; Number 88, Yuxiang Road, Tianzhu, Shunyi District, Beijing
• Time: March 29-31, 2016
• GN Booth No .: HALL E2 -E2200, booth area 272m2.
• Plane graph: http://public.cippe.com.cn/static/hall/2015bj/hall_e1.jpg
• Appointment email: sales@gnsolidscontrol. com
• GN Factory Location: 40KM into the Exhibition Center (40 Moments Drive)
In the event of 2015, GN Solids Control brought 1 unit drilling waste cuttings management system which is the most popular sellers in GN’s products line in the year connected with 2015. One skid wilt removable telescopic frame sets up all the equipment into a small unit. This unit can be transported by a trailer without having removing the equipment on it. Along with fully consideration on the handling diagram, this system is definitely including vertical cuttings dryer unit, VFD decanter centrifuge and relative transferring pump. GN also have modular design and style equipment could be ordered individually and then assembled on web-site according to specific onsite area condition. Modular design waste materials cuttings equipment could be a lot more freely layout onsite.
In addition to the waste cuttings management system, the traditional drilling fluids solids control equipments were also exposed to GN’s booth. High Gary the gadget guy force drying shaker, mud cleaner unit, 22 ” big bowl decanter centrifuge and even the piling undertaking used de-sanding unit were being shown there, which makes visitors sigh with emotion since GN could provide the total line solids control in addition to waste disposal equipment for different industries like oil going, no dig drilling and perhaps construction projects.
2016 is usually fully a fresh new year to get GN Solids Control, while GN was just accorded as New High-tech Party. With this honor, GN wish to show herself at the CIPPE 2016 with a new image. Brand new development on products will certainly be shown there to seize clients’ eyes. Expecting experiencing you again at CIPPE 2016.

GN Solids Control is doing motor drive centrifuge for over 5 years. After these years, GN centrifuge design, quality, working performance, working lifetime is reach World Class standard, competing with Derrick centrifuge, Swaco centrifuge, Nov brandt king cobra centrifuges. To provide more centrifuge choice, GN Solids Control is doing research on Hydraulic drive centrifuge, and this new type centrifuge will be shown at CIPPE 2016.

GN Solids Control is exporting lots of high quality, good price to international clients in oil gas drilling, HDD drilling, CBM drilling, water well drilling industries. Recent exporting project including but not limited to below cases.

Case 1: GN mud mixing system is exporting to Middle East

The client is GN old clients who bought one set 500gpm drilling mud system. Up to now, the performance is still very good. This save lots of cost and work time for client, also win good fame for client, more and more projects coming to the HDD drilling customer.

Case 2: GN mud cleaning system is exporting to Middle East for Water well drilling

The water drilling client buy one set 200gpm mud system from GN in 2014; after knowing more about GN, the buyer repeat two sets 500gpm mud cleaning system for water well drilling, with customized color of shale shaker, mud cleaner, mud tank, etc.

Case 3: GN Decanter centrifuge is exporting to Africa drilling market

GN Solids Control decanter centrifuge is mainly used for solids control / drilling waste management. The high quality centrifuge replace many US brand centrifuges in the market. GN centrifuge is replacement centrifuge for Derrick centrifuge, Swaco centrifuge, NOV brandt centrifuge.

Buying centrifuge from GN Solids Control, the client can get the best selected centrifuge from China, most cost-effective. We have one client firstly only test 1-2 sets centrifuge. After 3 years, the client place order of over 30 sets centrifuges.

GN Solids Control is committed to offer top quality solids control equipment. Pls contact us freely if you need some.

In this article, we mainly introduce GNLW223 Decanter Centrifuge, 1 mini centrifuge with high quality and perfect performance comes to mass production in GN Solids Company.

Until now, GN has the full range of decanter centrifuges from the big treatment capacity to small treatment capacity. For these centrifuges, the different rotate speed, different voltages and frequencies, fixed speed or variable speed, high or low configurations are also availablefor customer options.

Compared with the other types of Decanter Centrifuge made by GN Solids Control Company, the most obvious symbol of this Mini Decanter Centrifuge is itsvery small treatment capacity in unit time and higher speed. The details are as below,

• Max treatment capacity is 9m³/h (40GPM);
• Max speed is 4500RPM;
• Bowl diameter is 9 inches;
• Separation Point is 2-5μm；
• Besides, there are 2 types of speed for customer option. 1 is fixed speed and the other 1 is variable speed.

GNLW223 Mini Decanter Centrifuge is widely used for separating out very fine solids particles when customer needs the small treatment capacity, which is especially used in like the Diamond Core Drilling, Industrial Waste Water Management, Mining Industry and so on.

As its small treatment capacity and mini structure, GNLW223 Mini Decanter Centrifuge gets the good reaction from the global customers once goes into the market.

For the North America Market, until now GN Solids Control company has sold 15 units to the Canada, 2 units to the America and 3 units to the Chile.

The Project for Canada’s Customer – 10 Units GNLW223 Mini Decanter Centrifuge

The Project for Chile’s Customer – Solids RemovalSystem with GNLW223 Decanter Centrifuge Configured

If any customer is interested to this Mini Decanter Centrifuge, the following details are needed to provide to us so that GN Solids Control company could confirm if our product could meet your requirement in advance. As below,

• Solid Content of Fluid;
• Specific Gravity of Fluid;
• Viscosity of Fluid;
• Main Solid-phase Composition of Fluid;
• Solid-phase Particles Size Distribution;
• Source of Fluid;
• Expected Treatment Capacity.

Explosion proof is firmly requested on oil drilling site for the application of motors and control panel. This is to secure the safety of operation as there will be hazardous and flammable gas on the drilling site.

From the beginning of GN company establishing. GN provided drilling mud system to oil field with explosion proof standard electric motors and control panels. Till now, GN has enriched the motors and control panels that provided with different Ex. Proof certification and up to hazardous Zone 1 area application.

GN is able to provide Ex. Proof items with certification of IEC and ATEX. In regards to the motors, GN can provide certified units with CSA, UL and IEC. These certifications would meet demand of customers from the Canada and USA and some other areas.

This is really good news for both GN and the customers from North America. GN Solids Control got the opportunity to supply the mud system to North America, in the meantime, the customer can get the motor with a cost saving price. GN’s business will be expanded greatly in this market, as a feedback, the customer will get mud system with top quality and reasonable price.

However, not all the mud system in drilling project will request Ex. Proof motor and control panel just like the HDD and water well drilling. For some cost saving purpose, the non-Ex proof motor and panel will be used in the mud system. This type drilling is not so deep, and no flammable gas will be come out from the underground, the sparks produced during the electric devices running will not ignites the flammable gas.

GN is always focusing on higher level customer and providing high standard products, which means the motors GN provided could be non-Ex. Proof , while all the control panel in GN’s mud system are explosion proof standard.

Experienced sales guys know how to ask question to clients and get the required information so that he or she could make an accurate and timely quotation to the clients. This is the common rules for the sales guys in all the industries. It makes no exceptions for the sales of drilling mud system.

Drilling mud system is used to match the drilling rig for recycling the drilling fluids to reduce the drilling cost. Comparing with the single drilling fluids solids control equipment, the mud system is consisting of many equipment and mud tanks. Mud system is much complicated. So, if a sales guy wants to give a quote to the clients, he should know what the client’s request is. However, sometimes even the clients don’t what information would be helpful for sales guys to make a quote.

Here, we would like to share a knack for all the sales guys who want to serve the clients better and save the communication time before quoting.

In regards to the drilling mud system for oil & gas drilling, when client’s inquiry is coming, we would like to know some key information. What is the Horse Power of the rig? What is the loading capacity of the rig hook? And how deep you want to drill? In fact, so long as we got answer of any one question, then we are able to give the client commercial and technical quote. Such as the China model ZJ40, if we got this model, we will know this rig can drill down to 4000 meters, the hood capacity is around 225 metric ton, and the rig Horse Power is 1000. Here we say the HP is for the rig winch. And then we will get what is the flow rate of the used drilling mud, and how many mud tank this rig will need for storing active mud. GN Solids Control always has the standard configuration for rig from 550 HP to 3000 HP.

Together with the commercial offer, for the mud system quote, GN solids control  is willing to provide a technical offer including the drawing of equipment layout and working diagram. This would be much helpful to clients to understand how GN’s mud system works and what equipment involved in this mud system.