GN crank up two sets of 500 GPM system for the Chinese largest HDD drilling contractor. We are a stable and reliable partner for supplying the mud recycle system including shale shaker, mud cleaner, centrifugal pump, tank and other relative unit. GN high quality equipment and positive customer service attitude has received compliment from our clients. We will show you the Configuration of 500 GPM system..

Main Components

1. First step is one set linear motion shale shaker with 40 mesh screen to separate solids above 400 microns

2. Second & third step are 10″ de sander cone and 4″ de silter cone to separate smaller solids

3. There are two sets of centrifugal pump for pumping the mud to de sand and de silter.

4. Mud tank is with walkway, handrail, pipeline, valves, etc

GN is able to supply from 150 GPM to 3000GPM system to suit different projects. Also, our systems are exported over 60 countries and areas not only for the HDD but also apply for the CBM, oil & gas drilling, TBM, bored pile and dredge slurry separation etc. For more information, please contact with lin@gnsolidscontrol.co

Flare kind poor boy Vacuum Degasser is usually a preferred sort poor boy degasser connected having a flare igniter.
Traits of flare sort poor boy degasser
Flare kind poor boy Vacuum Degasser is surely an reputable and crucial security gear for drilling operations. It may be great for use specifically where drilling is almost absolutely to encounter important volumes of gas, sour gas or when an operator is drilling with an below balanced mud column.
Vent line of flare type poor boy degasser
Flare sort poor boy Vacuum Degasser is equipped with U-tube vent line with min. length 50m, diameter eight?The vent line lead the hazardous gas to remote safety region and fire it.
Parameters of flare variety poor boy Vacuum Degasser
Model GNZYQ1000A
Tank diameter 1000mm
Capacity 200~280m3/h
Inlet four Inch
Output ten Inch
Vent Line eight Inch
Weight 2234Kg
Vacuum degasser connected with poor boy degasser
There ordinarily vacuum degasser in mud plan just just soon after shale shaker. Some time, the gas from vacuum degasser discharged straight to atmosphere. In some case, the drilling internet net website will connect vent line of vacuum degasser with poor bog degasser vent line, to fire the gas appropriate straight away after separated.

visit here to track more Vacuum degasser infor,related post as below:

http://www.gnsolidsamerica.com/vacuum-degasser.html

GN has designed a variety of mud system to all over the world including oil & gas drilling industry, CBM and HDD project. There is a 500GPM mud system for Middle East.

Components

1.There are three compartments in the mud tank, which is Shaker compartment, mud-cleaner compartment, mixing compartment.

2. GNYZ series submersible slurry pump provide the slurry from mud pit to GN shale shaker

3. Under the 40 mesh shaker screen, three panels and large screen area GNZS703 is able to handle with 528GPM fluid with excellent working performance

4.1# centrifugal pump transport the fluid from shaker compartment to de sander unit.2# centrifugal pump will transport the fluids from de sander compartment to de silter unit for the final process

5. Second and third cleaning steps make up mud cleaner which is GNZJ703E shale shaker, one unit 10″ de sander cone and eight  unit 4″ cones

6. Integral mixing system GNSLS35A-300 Jet Mud mixer which efficiency in blending chemical such as bentonite, polymers and other powder additives with drilling fluid.

GN 500 GPM mud system is a compact and user friendly solids control design. For your project, please contact with GN Solids control.

GNMS series mud cleaner is definitely a certainly developed compact program for treating the drilling mud in pretty a handful of measures by signifies of various mud pipelines connecting tanks and several functional equipments via the whole operation procedure.

Per mud tanks, you could find out trip tank, shale shaker tank, desander/desilter tank, centrifuge tank, mixing tank and storage tank. Per equipments, it can be achievable to uncover 4 measures solids control/ 5 approaches clearing measures like GNZS shale shaker, GNZCQ Vacuum degasser, GNZJ mud cleaner, GNLW mud cleaner, Mud agitator and Mud gun, Jet mud mixer and and so forth.

All they are multi-functionally connected by diverse pipeline,GNMS system can lead the drilling mud cleaner into a circulation as per drilling method demands, and could also treat mud cleaner by suggests of adding weight, mixing/preparing, agitating and filtering.

Water pipeline for supplying the entire GNMS method clean water is connected to water pipes,Chemical tank and pipeline can present the method with corresponding chemical compounds and elements added in towards the mud cleaner recycling plan by way of chemical pipeline to corresponding tank. Mud gun pipeline is made use of to transport the mud from 1 tank to 1 additional. Overflow pipeline is for the mud cleaner to flow to oriented tanks very simply and smoothly.

So, in all, GN New Model Mud Cleaner for US Customer is really a total method combined by mud tanks, solids manage and conveying equipments, and, essential pipelines.now,about GN New Model Mud Cleaner for US Customer this article,we check it and find it is good about solids control introduce.pls contact it. for more about gn company news,pls read here, GNSOLIDSAMERICA Can Manufacture Premium Vertical cuttings dryer is 24/7 for service.

One mud cleaner unit is purchase by the native US solids control company. Custom will apply this equipment for separating particle. According to customers’ feedback, they are pretty satisfied with our unit performance and completely meet his requirement. Our fast delivery time and quickly response give our client confidence to purchase the unit. There is no doubt that US market will be the huge potential market for GN solids control unit

Features of GN mud cleaner

1.10 inch vortex cones will handle a range from 100 microns particles to 40 microns particle, 90% solids will be kick out from the de sander cones

2.4 inch vortex cones focus on the 40 microns to 20 microns solids without ball valve.

3.Both of cones are 100% PU material assure the cones long life service and stable working condition

4.Shale shaker and shaker screen ultimately separate the solids from de sander and de silter

5.We could provide the fast service and technical support for the America market as we have the branch in Houston

Stay with GN gives your best solution

Mud agitator is a standard machine for drilling mud tank. It really is used in mud tank to agitating fluids and keep away from it from settling down.
Per the design variety, you will discover coupling variety agitator and direct connecting sort mud agitator.
Per difference Horsepower, you will discover agitator vary from 4hp to 30hp.
JBQ   Mud Agitator Technical Parameters:
Model Motor (Kw) Speed (RPM) Impeller Size (mm) Impeller Qty (pcs) Ratio Weight (Kg) Dimension(mm)
GNJBQ030A 3 60/72
(50HZ/60HZ) 650 1 25:1 190 909×525×527
GNJBQ055A 5.5 850 1 250 1072×610×588
GNJBQ075A 7.5 950 1 356 1157×670×607
GNJBQ075A-D 800 2 378
GNJBQ110A 11 1050 1 479 1297×740×692
GNJBQ110A-D 850 2 494
GNJBQ150A
15 1100 1 684 1330×890×747
GNJBQ150A-D 950 2 702
GNJBQ185A-D 18.5 1050 2 750 1510×890×753
GNJBQ220A-D 22 1100 2 780 1529×890×753
Remarks Shaft and impeller will probably be offered by GN, but not including within the weight & dimension.
How to match mud agitator:
1) Per tank dimension, usually 25cbm around there should be a mud agitator.
2) Mud agitator shaft length depends on tank dimension.

Which tank compartment should equipped mud agitator?here http://mudagitator.wordpress.com/2014/04/26/gn-mud-agitator-design-in-2014-year/, following is the information
1) Desilter tank, centrifuge tank, mixing tank, storage tank, trip tank, pill tank, there should be equipped mud agitator
2) Vacuum degasser tank, it’s optional to equipped mud agitator
3) Shale shaker tank, there is normally no need to equipped with mud agitator

For a mine tailings dredging project , project contractors normally need to dewater the mine tailings and recover the sand and silt size particles.  Depends on different mining material, contractors should carefully select the relative equipment and treating capacity to process the fluids.

First of all, we know what percentage and size of coarse tailing, full tailing stream and fine tailing. According the information, we could the choose the shale shaker with shaker screen and de sander or de silter.

Secondly, we should know that the expecting treating capacity and recovery the size of particle. According treating capacity and particle size, we are able to select the mount the shale shaker and the number of hydrocyclone cones. If the recovery size of particle is over 0.04, de sander cones will be enough to met clients’ requirement.

For 1500GPM Mining dredge

1.3 Sets of GNZS703E shale Shaker

2.1 Set of GNZS703E-3S16N Mud cleaner or GNZJ703E-3S desaner

Commonly, Hi-G dryer shaker is employed for WBM drilling cuttings remedy and Vertical cuttings dyer is applied for OBM drilling cuttings treatment. The OOC of WBM solids discharged from Hi-G dryer shaker is about 20%; the OOC of OBM solids discharged from Vertical cuttings dyer is about 5%.

GN solids control 2nd generation solutions is been testing in CNPC job site. The testing drilling mud is WBM. Just after treated by 2nd generation vertical cuttings dryer, the solids discharge is substantially dryer which is usually solidification directly. The recycled clean water based mud can be transferred to decanter centrifuge for ultra fine solids separation, then the liquid might be transferred back to solids manage mud tanks for reuse.

The WBM drilling cuttings after treated by Vertical cuttings dyer is mud cake, substantially dryer. As OBM is easier than WBM when treated by Vertical cuttings dryer, the OBM treating outcome must be a great deal superior. Within this case, we can save plenty of price for client, no need Hi-G dryer anymore.

For customer, wanting 1 sets cuttings dryer, you could possibly speak to GN Solids handle to acquire clear answer. We can offer you solids control and cuttings dryer, reputable working overall performance and financial in price.

Full line of screens providing higher throughput, extended life, reduced cost all of screens in our industry-leading line come with gn solids patented and very sturdy composite-frame technology. We offer 4 screen meshes with units made for both gn solids and competitor Decanter Centrifuge, all delivering:

Longer screen life. The composite frame design and style gives smaller sized additional a lot of panels, evenly distributing mechanical stresses and containing mesh tears once they happen.

Maintains or reduces current screen weight. Our evolutionary gn solution composite screen weighs in regards to the very same as the original HIFLO screen and drastically less than metal-frame screens.

Simple to repair. The patented plug-repair system, readily available on gn product screens for the Brandt 300 shaker, reduces repair time for you to less than two minutes. Basically get rid of the screen from the shaker and snap in a factory-made plug. This method eliminates the need to have for removing the broken mesh and needs no cutting, gluing or bonding time.

Four different screen meshes offered

With all the gn item frame offering a offshore drilling solid base, gn solids offers four unique screen meshes made for all drilling environments. The meshes we have accessible let you pick out the appropriate mesh for the job with out compromising screen life or throughput capacity.

gnsolids item delivers unmatched screen life and exceptional capacity. Bigger diameter wire gives our patented gnsolids item screens the longest life in the sector nowadays. Combining gnsolids item screens with all the gn solution composite frame technologies enables for exceptionally high fluid-handling capacity. The high conductance also outcomes in decreased mesh loading in comparison to normal mesh types, additional guaranteeing unmatched screen life.

Gn mesh for sandstone. The Gn’s screen was developed particularly to deal with the drilling of sandstone formations. Typically, these formations can resent blinding complications with normal screen meshes.

gn solution for any better cut. The gn item is created specifically for applications requiring a well-defined separation efficiency or cut.

gn solids also delivers the high capacity layered rectangular mesh. The diameter of your wire employed to create gn mesh is smaller than that applied to create gnsolids item. The mesh also just isn’t calendared. gn mesh has extra open location than gnsolids item, resulting in larger capacity. On the downside, it includes a shorter screen life than gnsolids item and reduced separation efficiency. If you want to explore more information please visit our

USA drilling waste management using the techniques and technologies that allow them to meet their requirements at every single stage with the drilling method as a result of ensuring efficient and profitable production. We provide drilling fluid techniques engineered to improve drilling overall performance by anticipating fluids-related problems, fluid techniques and specialty resources built to optimize wellbore productivity, production engineering answers to maximize production costs, and environmental options that securely handle waste volumes produced in both drilling and manufacturing operations.

So as to sustain and boost world oil and fuel manufacturing, increased levels of drilling will be vital in increasingly challenging and complex environments, leading to wells with longer and much more complex profiles. Understanding the technical challenges and mitigating the consequent chance beforehand of the drilling and production packages can mean key cost cost savings and nicely overall performance improvement for our clients. drilling waste management plays a critical element in meeting these challenges.

In May 2012, Gnsolidsamerica grew to become a part of Schlumberger by way of its merger with Smith Worldwide. The main driver behind this merger is drilling optimization: in order to sustain and improve globe oil and gasoline manufacturing, higher ranges of drilling will likely be needed in more and more challenging and complex environments. This means wells with longer and even more complex profiles. Knowing the technical challenges and mitigating the consequent threat in advance of the drilling system can imply key value cost savings and very well functionality improvement for our clients. Gnsolidsamerica will perform a important portion in meeting these difficulties.

From its earliest roots, Gnsolidsamerica acknowledged that it ideal served its customers, not by delivering drilling fluid items for the consumer?but by anticipating and planning for how those merchandise would behave in the downhole natural environment, both to optimize drilling effectiveness and also to lessen the threat associated with fluids-related challenges.

No matter if delivering drilling fluid programs and merchandise, completions methods, solids handle capabilities, stress control, waste management, production technologies or horizontal and directional drilling for mining or water wells, Gnsolidsamerica is there to supply the solutions, companies and experience you will need for your task.

Whether providing drilling fluid systems and products, completions systems, solids control capabilities, pressure control, waste management, production technologies or horizontal and directional drilling for mining or water wells, gn is there to provide the products, services and expertise you need for your project. Different companies produced solid control system will certainly be differences, so we strongly recommend that you choose GN machine, its workmanship is very fine place, enough to make your eyes light up.